FRONT ACCELERATION SENSOR INSTALLATION

PROCEDURE

1. INSTALL ACCELERATION SENSOR

   
   

   1. Install the acceleration sensor with the 2 nuts.

      Torque:

      8.5 N*m  { 87 kgf*cm, 75 in.*lbf }

      Note

      
      

      • Avoid any impact to the acceleration sensor.

      • Do not drop the acceleration sensor. If it is dropped, replace it with a new one.

   2. Connect the connector.

   3. Return the floor carpet to its original position.

2. INSTALL NO. 2 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY (for RHD)

   Tech Tips

   Use the same procedure for RHD and LHD.

   Click here

3. INSTALL FRONT DOOR OPENING TRIM COVER LH

   Click here

4. INSTALL FRONT DOOR SCUFF PLATE LH

   Click here

5. CONNECT CABLE TO NEGATIVE AUXILIARY BATTERY TERMINAL

   Note

   When disconnecting the cable from the negative (-) auxiliary battery terminal, some systems need to be initialized after the cable is reconnected.

   Click here

6. INSTALL BATTERY SERVICE HOLE COVER LH

   Click here