DIFFERENTIAL MOUNT CUSHION REMOVAL

PROCEDURE


  1. REMOVE REAR SUSPENSION MEMBER SUB-ASSEMBLY

    Click here

  2. REMOVE REAR NO. 1 DIFFERENTIAL MOUNT CUSHION


    1. Using SST, remove the rear No. 1 differential mount cushion.

      SST
      09316-12010
      B003XT4C02
      B003XUN SST bolt location B003YHT Front of the Vehicle

      Note


      • Before using SST, apply grease to the SST bolts.

      • Be sure to use the correct combination of SST.

      • Make sure that SST (09316-12010) contacts the entire circumference of the rear No. 1 differential mount cushion.

      • Do not tilt the bolts of SST.

      • Tighten the 2 bolts of SST so that they enter the 2 holes of the rear No. 1 differential mount cushion by an equal amount.

      • Do not bring SST (09316-12010) into contact with the rear suspension member sub-assembly.

      Tech Tips

      Install the 2 SST bolts to the 2 SST holes as shown in the illustration.

  3. REMOVE REAR NO. 2 DIFFERENTIAL MOUNT CUSHION


    1. Using SST, remove the rear No. 2 differential mount cushion.

      SST
      09316-12010
      B003XUCC02
      B003XUN SST bolt location B003YHT Front of the Vehicle

      Note


      • Before using SST, apply grease to the SST bolt.

      • Be sure to use the correct combination of SST.

      • Make sure that SST (09316-12010) contacts the entire circumference of the rear No. 2 differential mount cushion.

      • Do not tilt the bolt of SST.

      • Do not bring SST (09316-12010) into contact with the rear suspension member sub-assembly.

      Tech Tips

      Install the SST bolt to the SST hole as shown in the illustration.