FRONT AXLE HUB REMOVAL

CAUTION / NOTICE / HINT

Note

When the brake pedal is first depressed after replacing the brake pads or pushing back the disc brake piston, DTC C1341, C1342, C1343 and/or C1344 may be stored. As there is no malfunction, clear the DTCs.

Tech Tips


  • Use the same procedure for the RH side and LH side.

  • The procedure listed below is for the LH side.

PROCEDURE


  1. REMOVE ABS MOTOR RELAY

    for LHD: Click here

    for RHD: Click here

  2. REMOVE FRONT WHEEL

  3. DISCONNECT SKID CONTROL SENSOR WIRE


    1. A0022EK

      Disconnect the skid control sensor wire connector from the front axle hub sub-assembly.

  4. SEPARATE FRONT DISC BRAKE CALIPER ASSEMBLY

    Click here

  5. REMOVE FRONT DISC

    Click here

  6. REMOVE FRONT AXLE HUB SUB-ASSEMBLY


    1. A0021L5

      Remove the 4 bolts, front axle hub sub-assembly and front disc brake dust cover from the steering knuckle.