SHIFT PADDLE SWITCH REMOVAL

CAUTION / NOTICE / HINT

Note


  • Do not replace the spiral cable with sensor sub-assembly with the auxiliary battery connected and the power switch on (IG).

  • Do not rotate the spiral cable with sensor sub-assembly without the steering wheel assembly with the auxiliary battery connected and the power switch on (IG).

  • Ensure that the steering wheel assembly is installed and aligned straight when inspecting the steering sensor.

PROCEDURE


  1. REMOVE STEERING WHEEL ASSEMBLY


  2. REMOVE CRUISE CONTROL MAIN SWITCH (w/ Lane Departure Alert System)

    Click here

  3. REMOVE STEERING PAD SWITCH ASSEMBLY (w/ Lane Departure Alert System)


  4. REMOVE SHIFT PADDLE SWITCH (TRANSMISSION SHIFT SWITCH ASSEMBLY) (w/o Lane Departure Alert System)


    1. A0020FS

      Disengage the No. 1 switch wire connector clamp from the steering wheel assembly.

    2. A0020DI

      Disconnect the No. 1 switch wire connector.

    3. A0021VP

      Remove the 4 screws, and disconnect the 2 shift paddle switches (transmission shift switch assemblies) from the steering wheel assembly.

    4. A0020OM

      Disengage the 5 guides to remove the 2 shift paddle switches (transmission shift switch assemblies) with No. 1 switch wire from the steering wheel assembly.

    5. A0021YU

      Disconnect the 2 shift paddle switch (transmission shift switch assembly) connectors to remove the 2 shift paddle switches (transmission shift switch assemblies) from the No. 1 switch wire.

  5. REMOVE SHIFT PADDLE SWITCH (TRANSMISSION SHIFT SWITCH ASSEMBLY) (w/ Lane Departure Alert System)


    1. A0023BE

      Disengage the guide to disconnect the No. 1 switch wire from the steering wheel assembly.

    2. Disconnect the No. 1 switch wire connector.

    3. A0022WF

      Remove the 4 screws, and disconnect the 2 shift paddle switches (transmission shift switch assemblies) from the steering wheel assembly.

    4. A0020M8

      Disengage the 6 guides to remove the 2 shift paddle switches (transmission shift switch assemblies) with No. 1 switch wire from the steering wheel assembly.

    5. A0020LD

      Disconnect the 2 shift paddle switch (transmission shift switch assembly) connectors to remove the 2 shift paddle switches (transmission shift switch assemblies) from the No. 1 switch wire.