SHIFT LEVER REMOVAL

PROCEDURE


  1. REMOVE FRONT EXHAUST PIPE ASSEMBLY (TWC: Rear Catalyst)

    Click here

  2. REMOVE FRONT NO. 1 FLOOR HEAT INSULATOR

    Click here

  3. SEPARATE FLOOR SHIFT GEAR SHIFTING ROD SUB-ASSEMBLY


    1. Move the shift lever to N.

    2. A0020HLC01
      *a Lever

      Remove the nut and separate the floor shift gear shifting rod sub-assembly from the lever of the transmission floor shift assembly.

  4. REMOVE CONSOLE BOX ASSEMBLY

    Click here

  5. REMOVE NO. 1 CONSOLE BOX DUCT


    1. A0021J1

      Disconnect the 2 clamps from the No. 1 console box duct.

    2. A0020GT

      Remove the 2 clips and No. 1 console box duct.

  6. REMOVE TRANSMISSION FLOOR SHIFT ASSEMBLY


    1. A00232M

      Disconnect the transmission control switch connector.

    2. Disconnect the 4 clamps from the transmission floor shift assembly.

    3. A0022Y6

      Disconnect the shift lock control ECU connector.

    4. A0022WJ

      Remove the 4 bolts and transmission floor shift assembly from the body.