HYBRID VEHICLE TRANSMISSION UNIT DISASSEMBLY

PROCEDURE

1. REMOVE TRANSMISSION CONTROL SHAFT LEVER

   
   

   1. 

      Remove the nut, spring washer and transmission control shaft lever from the shift lever position sensor.

2. REMOVE TRANSMISSION CONTROL ROD GROMMET

   
   
   1. 

      *1	Spacer
      *2	Transmission Control Rod Grommet

      Remove the spacer from the transmission control rod grommet.

   2. Remove the transmission control rod grommet from the transmission control shaft lever.

3. REMOVE SHIFT LEVER POSITION SENSOR

   Click here

4. REMOVE ELBOW

   
   

   1. 

      Remove the 2 elbows from the hybrid vehicle transmission assembly.

   2. Remove the 2 O-rings from the 2 elbows.

5. REMOVE HYBRID VEHICLE TRANSMISSION ASSEMBLY TYPE T OIL SEAL

   Click here

6. REMOVE FLANGE YOKE ASSEMBLY

   Click here

7. REMOVE EXTENSION HOUSING TYPE T OIL SEAL

   Click here

8. REMOVE TRANSMISSION BREATHER PLUG SUB-ASSEMBLY

   
   

   1. 

      Remove the transmission breather plug sub-assembly from the hybrid vehicle transmission assembly.

9. DRAIN HYBRID TRANSMISSION FLUID

   Tech Tips

   Perform this procedure only when remove of the transmission oil pan sub-assembly is necessary.

   
   

   1. 

      Remove the drain plug and gasket to drain the hybrid transmission fluid.

   2. Install the drain plug and a new gasket to the hybrid vehicle transmission assembly.

      Torque:

      20 N*m  { 204 kgf*cm, 15 ft.*lbf }

10. REMOVE TRANSMISSION OIL PAN SUB-ASSEMBLY

    
    

    1. 

       Remove the 18 bolts, gasket and transmission oil pan sub-assembly from the hybrid vehicle transmission assembly.

    2. 

       Remove the 2 magnets from the transmission oil pan sub-assembly.

11. REMOVE OIL COOLER RETURN TUBE

    
    

    1. 

       Remove the oil cooler return tube from the hybrid vehicle transmission assembly.

12. REMOVE OIL STRAINER ASSEMBLY

    
    

    1. 

       Remove the 3 bolts and oil strainer assembly from the hybrid vehicle transmission assembly.