MILLIMETER WAVE RADAR SENSOR REMOVAL

PROCEDURE


  1. REMOVE COOL AIR INTAKE DUCT SEAL

    Click here

  2. REMOVE MILLIMETER WAVE RADAR SENSOR ASSEMBLY


    1. B003YR4

      Disconnect the connector.

    2. A0022FOC02
      B003XUN Bolt
      B003YHT Screw

      Remove the 2 bolts and 2 screws.

    3. Disengage the 2 guides and remove the millimeter wave radar sensor assembly.

      Note

      Do not reuse the millimeter wave radar sensor assembly if it has been dropped or subjected to a severe impact.