Click here

FORWARD RECOGNITION CAMERA SYSTEM, Diagnostic DTC:C1AA0

Click here
Click here
DTC Code DTC Name
C1AA0 Front Camera Module Circuit
Click here

DESCRIPTION

When an internal malfunction is detected in the forward recognition camera, DTC C1AA0 is stored.

DTC No. Detection Item DTC Detection Condition Trouble Area
C1AA0 Front Camera Module Circuit 2 seconds after the power switch is turned on (IG), the forward recognition camera detects an internal malfunction. Forward recognition camera
Click here

CAUTION / NOTICE / HINT

Note:

  • When replacing the forward recognition camera, always replace it with a new one. If a forward recognition camera which was installed to another vehicle is used, the information stored in the forward recognition camera will not match the information from the vehicle. As a result, a DTC may be stored.

  • If the forward recognition camera has been replaced with a new one, be sure to perform forward recognition camera adjustment.

    Click here

Click here

PROCEDURE


  1. Click here

    CHECK FOR DTCs (FORWARD RECOGNITION CAMERA SYSTEM)


    1. Clear the DTCs.

      Click here


      1. Chassis > Front Recognition Camera > Clear DTCs


    2. Perform the following procedure.

      Tip:

      If the following procedure is not performed, the previously output DTC cannot be detected.


      1. Turn the power switch on (IG) and wait 2 seconds or more.

    3. Check for DTCs.

      Click here


      1. Chassis > Front Recognition Camera > Trouble Codes


      Result
      Result Proceed to
      DTC C1AA0 is not output A
      DTC C1AA0 is output B

  2. Click here

    REPLACE FORWARD RECOGNITION CAMERA


    1. Replace the forward recognition camera.

      Click here

    2. Perform forward recognition camera adjustment.

      Click here

      Result
      Proceed to
      NEXT

    • NEXT

      END