DYNAMIC RADAR CRUISE CONTROL SYSTEM

*a	ON/OFF
*b	-/SET
*c	+/RES
*d	CANCEL
*e	MODE

INPUT SIGNAL CHECK

Connect the GTS to the DLC3.
Check the cruise control switch using the Data List function of the GTS (ON/OFF, -/SET, +/RES, CANCEL and MODE).

*a	ON/OFF
*b	MODE

INSPECT MODE SWITCH

Turn the power switch on (IG).
Turn the cruise control system on using the cruise control switch (ON/OFF button). Then push the cruise control switch to MODE for 1 second or more to switch to the constant speed control mode.

*a

Cruise Control Indicator

(Vehicle-to-vehicle distance control mode)

*b

Cruise Control Indicator

(Constant speed control mode)

Check that the cruise control indicator (vehicle-to-vehicle distance control mode) goes off and the cruise control indicator (constant speed control mode) illuminates.

Note:

Do not push any other switches before pushing the cruise control switch to MODE. If another switch is pushed, turn the cruise control system off and repeat the procedure above.

Tip:

If a malfunction is detected, turn the power switch off and repeat the procedure above.

INSPECT STEERING PAD SWITCH ASSEMBLY

Turn the power switch on (IG).
Turn the cruise control system on using the cruise control switch (ON/OFF button).

*A	w/ Lane Departure Alert System
*B	w/o Lane Departure Alert System
*1	Distance Control Switch

Press the steering pad switch assembly (distance control switch).

*1	Long	*2	Middle
*3	Short	-	-

Check that the indication of the vehicle-to-vehicle distance, which is shown on the multi-information display in the combination meter assembly changes from long to middle to short in that order.

Tip:

Long is automatically selected each time the engine is started.

DYNAMIC RADAR CRUISE CONTROL SYSTEM OPERATION CHECK