CRUISE CONTROL SYSTEM Cruise Main Indicator Light Circuit

DESCRIPTION

• The hybrid vehicle control ECU assembly turns on the cruise control indicator by sending indicator output demand signals to the combination meter assembly using CAN communication.

• The cruise control indicator illuminates when the cruise control system has been turned on using the cruise control switch (ON/OFF button). If a malfunction is detected, the cruise control indicator goes off and a warning message is displayed.

• The cruise control indicator circuit uses CAN communication. If the cruise control indicator is not functioning correctly, check for CAN communication DTCs before troubleshooting this circuit.

CAUTION / NOTICE / HINT

PROCEDURE

1. PERFORM ACTIVE TEST USING GTS (Meter Display 1)

   
   

   1. Connect the GTS to the DLC3.

   2. Turn the power switch on (IG).

   3. Turn the GTS on.

   4. Enter the following menus: Body Electrical / Combination Meter / Active Test.

   5. Perform "Active Test" according to the display on GTS.

      
      Body Electrical > Combination Meter > Active Test

      Tester Display	Measurement Item	Control Range	Diagnostic Note
      Meter Display 1	Multi-information display	OFF or All	-

      
      Body Electrical > Combination Meter > Active Test

      Tester Display
      Meter Display 1

      Result
      Result Proceed to The multi-information display in the combination meter assembly turns on or off according to the operation of the Active Test. A The multi-information display in the combination meter assembly does not turn on or off according to the operation of the Active Test. B

   
   

   B

   GO TO METER / GAUGE SYSTEM Click here

   A

2. READ VALUE USING GTS (CCS Indicator M-CPU)

   
   

   1. Enter the following menus: Powertrain / Cruise Control / Data List.

   2. Read the Data List according to the display on the GTS.

      
      Powertrain > Cruise Control > Data List

      Tester Display	Measurement Item	Range	Normal Condition	Diagnostic Note
      CCS Indicator M-CPU	Cruise control indicator signal (Main-CPU)	ON or OFF	Each time cruise control switch (ON/OFF button) is pushed, ON or OFF changes	-

      
      Powertrain > Cruise Control > Data List

      Tester Display
      CCS Indicator M-CPU

      Result

      Result Proceed to The cruise control indicator illuminates and turns off according to the operation of the cruise control main switch (ON/OFF switch). A The cruise control indicator does not illuminate but the Data List item Cruise Indicator changes according to the operation of the cruise control main switch (ON/OFF switch). B The cruise control indicator does not illuminate and the Data List item Cruise Indicator does not change according to the operation of the cruise control main switch (ON/OFF switch). C

   
   

   A

   PROCEED TO NEXT SUSPECTED AREA SHOWN IN PROBLEM SYMPTOMS TABLE Click here

   B

   REPLACE COMBINATION METER ASSEMBLY Click here

   C

   REPLACE HYBRID VEHICLE CONTROL ECU ASSEMBLY Click here