EXHAUST PIPE REMOVAL

PROCEDURE


  1. REMOVE REAR NO. 2 FLOOR BOARD SUB-ASSEMBLY (w/ Cover)

    Click here

  2. REMOVE REAR NO. 1 FLOOR BOARD SUB-ASSEMBLY (w/ Cover)

    Click here

  3. REMOVE FRONT CENTER FLOOR BRACE

    B003XULC01
    B003XUN Bolt
    B003YHT Nut

    1. Remove the 6 bolts and 2 nuts.

    2. Disengage the 2 clips to remove the front center floor brace from the body.

  4. REMOVE HEATED OXYGEN SENSOR

    Click here

  5. REMOVE FRONT EXHAUST PIPE ASSEMBLY (TWC: Rear Catalyst)


    1. B003YPT

      Remove the 2 bolts and 2 nuts to disconnect the front exhaust pipe assembly (TWC: Rear Catalyst).

    2. B003XWA

      Remove the 4 bolts, 4 compression springs and front exhaust pipe assembly (TWC: Rear Catalyst).

    3. Remove the 3 gaskets from the front exhaust pipe assembly (TWC: Rear Catalyst).

  6. DISCONNECT TAIL EXHAUST PIPE ASSEMBLY


    1. B003Y4X

      Disconnect the tail exhaust pipe assembly from the 3 exhaust pipe supports.

      Note

      Protect the rear bumper assembly using protection material such as a piece of cloth to avoid damage by the tail exhaust pipe assembly.

  7. DISCONNECT TAIL EXHAUST PIPE LH


    1. B003Y5N

      Disconnect the tail exhaust pipe LH from the 3 exhaust pipe supports.

      Note

      Protect the rear bumper assembly using protection material such as a piece of cloth to avoid damage by the tail exhaust pipe LH.