INTAKE MANIFOLD COMPONENTS
ILLUSTRATION
| *1 | COOL AIR INTAKE DUCT SEAL | *2 | INLET NO. 1 AIR CLEANER |
 |
N*m (kgf*cm, ft.*lbf): Specified torque | - | - |
ILLUSTRATION
| *A | w/o EGR System | - | - |
| *1 | INJECTOR DRIVER | *2 | OUTLET HEATER WATER HOSE A |
| *3 | INTAKE MANIFOLD | *4 | INVERTER RESERVE TANK ASSEMBLY |
| *5 | INLET HEATER WATER HOSE A | *6 | STUD BOLT |
| *7 | VACUUM SENSOR ASSEMBLY | *8 | WIRE HARNESS CLAMP BRACKET |
| *9 | GASKET | *10 | INTAKE MANIFOLD STAY |
| *11 | EGR HOLE COVER PLATE | *12 | EGR INLET GASKET |
| *13 | NO. 2 WATER BY-PASS HOSE | *14 | PURGE VALVE (PURGE VSV) |
| *15 | NO. 2 FUEL VAPOR FEED HOSE | *16 | NO. 1 FUEL PIPE CLAMP |
| *17 | VENTILATION HOSE ASSEMBLY | *18 | WIRE HARNESS |
| *19 | HEATER WATER HOSE SET | - | - |
| |
N*m (kgf*cm, ft.*lbf): Specified torque | ● | Non-reusable part |
ILLUSTRATION
| *A | w/ EGR System | - | - |
| *1 | INJECTOR DRIVER | *2 | OUTLET HEATER WATER HOSE A |
| *3 | INTAKE MANIFOLD | *4 | INVERTER RESERVE TANK ASSEMBLY |
| *5 | NO. 2 EGR PIPE | *6 | INLET HEATER WATER HOSE A |
| *7 | STUD BOLT | *8 | VACUUM SENSOR ASSEMBLY |
| *9 | WIRE HARNESS CLAMP BRACKET | *10 | GASKET |
| *11 | INTAKE MANIFOLD STAY | *12 | EGR INLET GASKET |
| *13 | NO. 2 WATER BY-PASS HOSE | *14 | PURGE VALVE (PURGE VSV) |
| *15 | NO. 2 FUEL VAPOR FEED HOSE | *16 | NO. 1 FUEL PIPE CLAMP |
| *17 | VENTILATION HOSE ASSEMBLY | *18 | WIRE HARNESS |
| *19 | HEATER WATER HOSE SET | *20 | NO. 2 EGR PIPE GASKET |
| |
N*m (kgf*cm, ft.*lbf): Specified torque | ● | Non-reusable part |