PURGE VALVE INSTALLATION

PROCEDURE


  1. INSTALL PURGE VALVE (PURGE VSV)


    1. Install the purge valve (purge VSV) to the wire harness clamp bracket with the bolt.

      Torque:
      18 N*m  { 184 kgf*cm, 13 ft.*lbf }
    2. A011MS0C01
      *a 2 to 7 mm (0.0787 to 0.276 in.)
      *b 90°
      *c Front Side
      *d Paint Mark

      Connect the purge valve (purge VSV) connector.

    3. Connect the No. 2 fuel vapor feed hose to the purge valve (purge VSV).

    4. Connect the No. 2 fuel vapor feed hose to the purge valve (purge VSV) and slide the clip to secure it.

      Tech Tips

      Engage the clip within the area shown in the illustration.