EGR COOLER REMOVAL

PROCEDURE


  1. INSTALL ENGINE STAND

    Click here

  2. REMOVE ENGINE MOTOR CABLE CLAMP BRACKET


    1. A01MSD7

      Remove the 2 bolts and engine motor cable clamp bracket from the EGR cooler assembly and cylinder head sub-assembly.

  3. REMOVE NO. 2 EGR PIPE


    1. A01MTX7

      Remove the 2 bolts, 2 nuts, No. 2 EGR pipe, No. 2 EGR pipe gasket and EGR inlet gasket from the EGR valve assembly and intake manifold.

  4. REMOVE EGR VALVE BRACKET


    1. A01MRIM

      Remove the 2 bolts and EGR valve bracket from the EGR valve assembly and cylinder head sub-assembly.

  5. REMOVE EGR COOLER ASSEMBLY


    1. A01MSZ8

      Slide the clip and disconnect the No. 6 water by-pass hose from the EGR cooler assembly.

    2. A01MSIW

      Slide the clip and disconnect the No. 5 water by-pass hose from the EGR cooler assembly.

    3. Slide the clip and disconnect the No. 12 water by-pass hose from the EGR valve assembly.

    4. Slide the clip and disconnect the No. 4 water by-pass hose from the EGR valve assembly.

    5. A01MTLE

      Remove the 2 nuts, bolt and EGR cooler assembly from the cylinder head sub-assembly.

  6. REMOVE EGR VALVE ASSEMBLY

    Click here