OIL PRESSURE SWITCH INSTALLATION

PROCEDURE


  1. INSTALL ENGINE OIL PRESSURE SWITCH ASSEMBLY


    1. Degrease the threaded portion of the oil pressure switch assembly.

    2. A011P6K

      Apply adhesive to 2 or 3 threads of the engine oil pressure switch assembly.

      Adhesive
      Toyota Genuine Adhesive 1344, Three Bond 1344 or equivalent

      Note


      • Install the engine oil pressure switch assembly within 3 minutes after applying adhesive.

      • Do not apply adhesive to the oil inlet port of the engine oil pressure switch assembly.

    3. A011NP6C02
      *a Type A
      *b Type B

      Using a 24 mm deep socket wrench, install the engine oil pressure switch assembly.

      Torque:
      Type A
      14.7 N*m  { 150 kgf*cm, 11 ft.*lbf }
      Type B
      15 N*m  { 153 kgf*cm, 11 ft.*lbf }

      Note

      Do not start the engine within 1 hour of installation.

    4. Connect the engine oil pressure switch assembly connector.

  2. CHECK ENGINE OIL LEVEL

    Click here

  3. INSPECT FOR ENGINE OIL LEAK

    Click here