RADIATOR REMOVAL

PROCEDURE


  1. REMOVE COOL AIR INTAKE DUCT SEAL

    Click here

  2. REMOVE MILLIMETER WAVE RADAR SENSOR ASSEMBLY (w/ Dynamic Radar Cruise Control System)

    Click here

  3. REMOVE INLET NO. 1 AIR CLEANER

    Click here

  4. REMOVE ENGINE UNDER COVER

  5. DRAIN ENGINE COOLANT (for Engine)

    Click here

  6. REMOVE HOOD LOCK RELEASE LEVER PROTECTOR

    Click here

  7. DISCONNECT HOOD LOCK CONTROL CABLE ASSEMBLY


    1. A002243C01
      *A for RHD
      *B for LHD

      Disengage the 2 clamps to disconnect the hood lock control cable assembly from the upper radiator support sub-assembly.

  8. REMOVE HOOD LOCK ASSEMBLY

    Click here

  9. REMOVE RADIATOR RESERVE TANK ASSEMBLY


    1. A0022UIC02
      *1 Radiator Reserve Tank Hose
      *2 Reserve Tank Outlet Hose

      Slide the clip and disconnect the radiator reserve tank hose from the radiator assembly.

    2. Disengage the clamp to disconnect the radiator reserve tank hose from the fan shroud assembly.

    3. Slide the clip and disconnect the reserve tank outlet hose from the radiator reserve tank assembly.

    4. Disengage the 2 clamps to disconnect the reserve tank outlet hose from the fan shroud assembly.

    5. Disengage the clamp to disconnect the wire harness from the radiator reserve tank assembly.

    6. Disengage the 2 claws and remove the radiator reserve tank assembly from the fan shroud assembly.

  10. REMOVE RADIATOR HOSE SUB-ASSEMBLY


    1. A0022GF

      Slide the 2 clips and remove the radiator hose sub-assembly from the radiator assembly and water inlet.

  11. DISCONNECT NO. 2 RADIATOR HOSE SUB-ASSEMBLY


    1. A00211N

      Slide the clip and disconnect the No. 2 radiator hose sub-assembly from the radiator assembly.

    2. Disengage the clamp to disconnect the No. 2 radiator hose from the radiator hose clamp.

    3. Remove the radiator hose clamp from the fan shroud assembly.

    4. Remove the bolt to disconnect the No. 2 radiator hose sub-assembly from the fan shroud assembly.

  12. DISCONNECT NO. 2 OIL COOLER INLET HOSE


    1. A0022H4

      Disengage the clamp and disconnect the No. 2 oil cooler inlet hose from the No. 1 flexible hose clamp.

    2. Remove the No. 1 flexible hose clamp from the radiator assembly.

    3. Slide the clip and disconnect the No. 2 oil cooler inlet hose from the radiator assembly.

  13. DISCONNECT NO. 2 OIL COOLER OUTLET HOSE


    1. A0020JJ

      Slide the clip and disconnect the No. 2 oil cooler outlet hose from the radiator assembly.

  14. DISCONNECT ENGINE ROOM MAIN WIRE


    1. A0021H8

      Disconnect the cooling fan ECU connector.

    2. Disengage the 7 clamps and disconnect the engine room main wire from the upper radiator support sub-assembly.

  15. REMOVE UPPER RADIATOR SUPPORT SUB-ASSEMBLY

    A00237N

    1. Disconnect the 2 horn connectors.

    2. A0020YI

      Disengage the 6 clamps and disconnect the wire harness from the upper radiator support sub-assembly.

    3. A002259

      Remove the 5 bolts and upper radiator support sub-assembly.

  16. REMOVE FAN SHROUD ASSEMBLY


    1. A0021B2

      Disengage the 3 claws.

    2. Disengage the 3 guides and remove the fan shroud assembly from the radiator assembly.

      Note

      Make sure not to damage the radiator assembly when removing the fan shroud assembly.

  17. REMOVE RADIATOR ASSEMBLY


    1. A0022RN

      Disengage the 2 claws.

    2. Disengage the 2 guides and separate the cooler condenser assembly and radiator assembly (for inverter coolant) from the radiator assembly.

      Note

      Make sure not to damage the cooler condenser assembly or radiator assembly (for inverter coolant) when removing the radiator assembly.

    3. Remove the radiator assembly from the vehicle.

      Note

      Do not apply excessive force to the cooler condenser assembly, radiator assembly (for inverter coolant) or pipe when removing the radiator assembly.

  18. REMOVE RADIATOR SUPPORT CUSHION


    1. Remove the 2 radiator support cushions from the radiator assembly.

  19. REMOVE LOWER RADIATOR SUPPORT


    1. Remove the 2 lower radiator supports from the radiator assembly.