BATTERY COOLING DUCT(w/ Filter) INSTALLATION

PROCEDURE

1. INSTALL NO. 2 HYBRID BATTERY INTAKE DUCT

   
   

   1. Engage the clip and install the No. 2 hybrid battery intake duct.

2. INSTALL NO. 1 HYBRID BATTERY INTAKE DUCT

   Click here

3. INSTALL LUGGAGE COMPARTMENT TRIM COVER RH

   Click here

4. INSTALL NO. 1 ROOM PARTITION COVER (for Fold Down Seat Type)

   Tech Tips

   Use the same procedure as for the No. 2 room partition cover.

   Click here

5. INSTALL REAR SEAT SUB FLOOR PANEL (for Fold Down Seat Type)

   Click here

6. INSTALL REAR SEAT SIDE GARNISH RH

   Tech Tips

   Use the same procedure as for the LH side.

   Click here

7. INSTALL REAR DOOR SCUFF PLATE RH

   Tech Tips

   Use the same procedure as for the LH side.

   Click here

8. INSTALL REAR SEAT ASSEMBLY (for Fixed Seat Type)

   Click here

9. INSTALL REAR SEAT ASSEMBLY (for Fold Down Seat Type)

   Click here

10. INSTALL REAR LUGGAGE COMPARTMENT TRIM COVER

    Click here

11. INSTALL FRONT LUGGAGE COMPARTMENT TRIM COVER (for Fixed Seat Type)

    Click here

12. INSTALL FRONT LUGGAGE COMPARTMENT TRIM COVER (for Fold Down Seat Type)

    Click here

13. INSTALL LUGGAGE COMPARTMENT TRIM BOX

    Click here

14. INSTALL LUGGAGE COMPARTMENT FLOOR MAT

    Click here

15. CLEAR DTC

    Click here

    Tech Tips

    If the message "Cooling performance of the hybrid battery is low Consult a dealer" is displayed on the multi-information display in the combination meter assembly, clean or replace the No. 2 hybrid battery intake duct, and clear the DTCs to reset the learning values even if no DTCs are output.

    

    *a

    Multi-information Display

    *b

    Multi-information Display for F SPORT models (Movable meter ring activated)