BATTERY COOLING DUCT(w/ Filter) INSPECTION

PROCEDURE

1. INSPECT NO. 2 HYBRID BATTERY INTAKE DUCT

   
   

   1. Inspect the No. 2 hybrid battery intake duct.

      
      

      1. Visually inspect the No. 2 hybrid battery intake duct.

         Standard
         No deformation or cracks.

         If the result is not as specified, replace the No. 2 hybrid battery intake duct.

      2. 

         *a

         Filter

         Inspect the filter.

         Standard
         No clogs or damage.

         Note

         
         

         • If the filter is damaged, replace the No. 2 hybrid battery intake duct with a new one.

         • If the filter is damaged, check if there is foreign matter inside the battery cooling blower assembly. Clean or replace the battery cooling blower assembly as necessary.

   2. Clean the filter.

      Note

      
      

      • Do not use water or any other liquids when cleaning the filter. Use only compressed air.

      • To prevent damage to the filter, do not use a wire brush or scrubber.

      
      
      1. 

         *a	Filter
         *b	Filter (Incorrect)
         *c	Filter (Correct)

         Clean the filter by blowing compressed air as shown in the illustration.

      2. Check the filter. If it is deformed, correct the shape by hand.