BATTERY BLOWER REMOVAL

PROCEDURE


  1. REMOVE LUGGAGE COMPARTMENT FLOOR MAT

    Click here

  2. REMOVE LUGGAGE COMPARTMENT TRIM BOX

    Click here

  3. REMOVE FRONT LUGGAGE COMPARTMENT TRIM COVER (for Fixed Seat Type)

    Click here

  4. REMOVE FRONT LUGGAGE COMPARTMENT TRIM COVER (for Fold Down Seat Type)

    Click here

  5. REMOVE REAR LUGGAGE COMPARTMENT TRIM COVER

    Click here

  6. REMOVE REAR SEAT ASSEMBLY (for Fixed Seat Type)

    Click here

  7. REMOVE REAR SEAT ASSEMBLY (for Fold Down Seat Type)

    Click here

  8. REMOVE REAR DOOR SCUFF PLATE RH

    Tech Tips

    Use the same procedure as for the LH side.

    Click here

  9. REMOVE REAR SEAT SIDE GARNISH RH

    Tech Tips

    Use the same procedure as for the LH side.

    Click here

  10. REMOVE REAR SEAT SUB FLOOR PANEL (for Fold Down Seat Type)

    Click here

  11. REMOVE NO. 1 ROOM PARTITION COVER (for Fold Down Seat Type)

    Tech Tips

    Use the same procedure as for the No. 2 room partition cover.

    Click here

  12. REMOVE LUGGAGE COMPARTMENT TRIM COVER RH

    Click here

  13. REMOVE NO. 1 HYBRID BATTERY INTAKE DUCT


    1. B003YP9

      Remove the clip and No. 1 hybrid battery intake duct.

  14. REMOVE NO. 2 HYBRID BATTERY INTAKE DUCT

    Click here

  15. SEPARATE NO. 3 HYBRID BATTERY INTAKE DUCT


    1. A0020F3C01
      B003XUN Slide

      Disengage the 3 claws.

    2. Slide the No. 3 hybrid battery intake duct to separate the No. 3 hybrid battery intake duct from the battery cooling blower assembly as shown in the illustration.

  16. REMOVE BATTERY COOLING BLOWER ASSEMBLY


    1. A00220B

      Disconnect the battery cooling blower assembly connector and disengage the clamp.

    2. A0021WT

      Remove the 2 bolts, nut and battery cooling blower assembly.

      Note


      • Be sure not to touch the fan part of the battery cooling blower assembly.

      • Do not lift the battery cooling blower assembly using the wire harness.