ACCELERATOR PEDAL SENSOR INSTALLATION

CAUTION / NOTICE / HINT

PROCEDURE

1. INSTALL ACCELERATOR PEDAL ASSEMBLY

   
   

   1. Install the accelerator pedal assembly with the 2 bolts.

      Torque:

      5.4 N*m  { 55 kgf*cm, 48 in.*lbf }

2. INSTALL ACCELERATOR PEDAL PAD

   
   

   1. Engage the 2 claws to install the accelerator pedal pad.

3. INSTALL ACCELERATOR PEDAL SENSOR ASSEMBLY

   Note

   
   

   • Avoid physical shock to the accelerator pedal sensor assembly.

   • Do not disassemble the accelerator pedal sensor assembly.

   • The accelerator pedal sensor assembly does not require lubrication.

   • Do not apply oil or other lubricants to the accelerator pedal sensor assembly. If applied, the accelerator pedal sensor assembly must be replaced.

   
   

   1. Install the accelerator pedal sensor assembly with the 2 nuts.

      Torque:

      5.4 N*m  { 55 kgf*cm, 48 in.*lbf }

   2. Connect the accelerator pedal sensor assembly connector.