REAR CRANKSHAFT OIL SEAL REMOVAL

PROCEDURE


  1. REMOVE HYBRID VEHICLE TRANSMISSION ASSEMBLY

    Click here

  2. REMOVE TRANSMISSION INPUT DAMPER ASSEMBLY


    1. A011MEFN02

      Using SST, hold the crankshaft pulley assembly.

      SST
      09213-54015

      Tech Tips

      SST(Crankshaft pulley holding tool) fixing bolt part No. : 91551-80650(2 pcs)

    2. A011M0D

      Remove the 6 bolts and transmission input damper assembly.

  3. REMOVE FLYWHEEL SUB-ASSEMBLY


    1. A011MEFN03

      Using SST, hold the crankshaft pulley assembly.

      SST
      09213-54015

      Tech Tips

      SST(Crankshaft pulley holding tool) fixing bolt part No. : 91551-80650(2 pcs)

    2. A011NZN

      Remove the 8 bolts and flywheel sub-assembly.

  4. REMOVE ENGINE REAR OIL SEAL


    1. A011M3LC03
      *1 Protective Tape
      *a Cut Position

      Using a knife, cut off the lip of the engine rear oil seal.

    2. Using a screwdriver, pry out the engine rear oil seal.

      Tech Tips

      Tape the screwdriver tip before use.

      Note

      Do not damage the surface of the press fit hole or the crankshaft.