HYBRID CONTROL SYSTEM, Diagnostic DTC:P060B-134, P060B-135, P060B-570, P062F-143
| DTC Code | DTC Name |
|---|---|
| P060B-134 | Internal Control Module A/D Processing Performance |
| P060B-135 | Internal Control Module A/D Processing Performance |
| P060B-570 | Internal Control Module A/D Processing Performance |
| P062F-143 | Internal Control Module EEPROM Error |
DESCRIPTION
The power management control ECU monitors its internal operation and will store these DTCs when it detects an internal malfunction. If these DTCs are output, replace the power management control ECU.
| DTC No. | Detection Item | DTC Detection Condition | Trouble Area | MIL | Warning Indicate |
|---|---|---|---|---|---|
| P060B-134 | Internal Control Module A/D Processing Performance | ECU internal malfunction (Built-in ADC failure) (1 trip detection logic) |
Power management control ECU | Comes on | Master Warning Light: Comes on |
| P060B-135 | Internal Control Module A/D Processing Performance | ECU internal malfunction (Built-in ADC failure) (1 trip detection logic) |
Power management control ECU | Comes on | Master Warning Light: Comes on |
| P060B-570 | Internal Control Module A/D Processing Performance | ECU internal malfunction (Built-in ADC failure) (1 trip detection logic) |
Power management control ECU | Comes on | Master Warning Light: Comes on |
| P062F-143 | Internal Control Module EEPROM Error | ECU internal malfunction (EEPROM error) (1 trip detection logic) |
Power management control ECU | Comes on | Master Warning Light: Comes on |
CAUTION / NOTICE / HINT
Tech Tips
After the repair, clear the DTCs and perform the following procedure to check that DTCs are not output.
-
Turn the power switch off and wait for 30 seconds or more.
-
Turn the power switch on (IG) and wait for 15 seconds or more.
