AIR FUEL RATIO SENSOR REMOVAL

Click here Click here

PROCEDURE

1. Click here

   PRECAUTION (for RHD)

   Click here

2. Click here

   REMOVE SERVICE PLUG GRIP (for RHD)

   Click here

3. Click here

   REMOVE CONNECTOR COVER ASSEMBLY (for RHD)

   Click here

4. Click here

   CHECK TERMINAL VOLTAGE (for RHD)

   Click here

5. Click here

   INSTALL CONNECTOR COVER ASSEMBLY (for RHD)

   Click here

6. Click here

   REMOVE INVERTER MOTOR CABLE BRACKET ASSEMBLY (for RHD)

   Click here

7. Click here

   REMOVE INVERTER TERMINAL COVER (for RHD)

   Click here

8. Click here

   DISCONNECT MOTOR CABLE (for RHD)

   Click here

9. Click here

   DISCONNECT GENERATOR CABLE (for RHD)

   Click here

10. Click here

    REMOVE AIR FUEL RATIO SENSOR

    
    
    1. 

       *1	Wire Harness Clamp Bracket

       Disconnect the air fuel ratio sensor connector.

    2. Disconnect the clamp and remove the wire harness clamp bracket from the air fuel ratio sensor.

    3. 

       Using SST, remove the air fuel ratio sensor from the exhaust manifold converter sub-assembly.

       09224-00010