SFI SYSTEM(w/o EGR System) PRECAUTION


  1. INITIALIZATION

    Note


    • When the cable is disconnected from the negative (-) auxiliary battery terminal, initialize the following system(s) after the cable is reconnected.

      System Name See Procedure
      Parking Assist Monitor System

      Click here

      Air Conditioning System

  2. PRECAUTIONS FOR INSPECTING HYBRID CONTROL SYSTEM


    1. Before inspecting the high-voltage system or disconnecting the low voltage connector of the inverter with converter assembly, take safety precautions such as wearing insulated gloves and removing the service plug grip to prevent electrical shocks. After removing the service plug grip, put it in your pocket to prevent other technicians from accidentally reconnecting it while you are working on the high-voltage system.

      Note


      • After turning the power switch off, waiting time may be required before disconnecting the cable from the negative (-) auxiliary battery terminal. Therefore, make sure to read the disconnecting the cable from the negative (-) auxiliary battery terminal notices before proceeding with work.

        Click here

      • After removing the service plug grip, turning the power switch on (READY) may cause a malfunction. Do not turn the power switch on (READY) unless instructed by the repair manual.

    2. After removing the service plug grip, wait for at least 10 minutes before touching any of the high-voltage connectors or terminals.

      B003YND

      Tech Tips

      Waiting for at least 10 minutes is required to discharge the high-voltage capacitor inside the inverter with converter assembly.

  3. NOTICE FOR HYBRID CONTROL SYSTEM ACTIVATION


    1. When the warning light is illuminated, or the auxiliary battery has been disconnected and reconnected, attempting to turn the power switch on (READY) may not start the system (the system may not enter the READY-on state) on the first attempt. If so, turn the power switch off and reattempt to start the hybrid system.

  4. WHEN USING GTS

    CAUTION:

    Observe the following items for safety reasons:


    • Before using the GTS, read the instruction manual.

    • Prevent the GTS cable from being caught on the pedals, shift lever or steering wheel when driving with the GTS connected to the vehicle.

    • When driving the vehicle for testing purposes using the GTS, 2 persons are required. One is for driving the vehicle, and the other operates the GTS.

  5. COOLING FAN SYSTEM

    CAUTION:


    • When the power switch is turned off and the engine temperature is high, the cooling fans may operate for a maximum of 8 minutes depending on the auxiliary battery voltage.

    • After turning the power switch off, keep hands and objects away from the fans when they are operating.

    Tech Tips

    If all of the following are met for a certain period of time during a few minutes immediately before the power switch is turned off, the cooling fans will continue to operate for a maximum of 8 minutes after the engine is stopped. This is performed to ensure restartability.


    • The GTS indicates a very high coolant temperature.

    • The GTS indicates a high outside air temperature.