INSTRUMENT PANEL SAFETY PAD INSTALLATION

PROCEDURE


  1. INSTALL INSTRUMENT PANEL SAFETY PAD SUB-ASSEMBLY


    1. When installing a new instrument panel safety pad sub-assembly:


      1. Immediately before installing the instrument panel safety pad sub-assembly, twist and cut off the portion as shown in the illustration.

        A0020CF

    2. Engage the 4 guides to temporarily install the instrument panel safety pad sub-assembly as shown in the illustration.

      A0021I7

      Note


      • Do not damage the instrument panel safety pad sub-assembly.

      • Do not allow the wire harnesses to interfere with the surrounding parts.

    3. Install the instrument panel safety pad sub-assembly with the 13 bolts<A>, 2 bolts<B> and nut<E>.

      Torque:
      Bolt<B>
      20 N*m  { 204 kgf*cm, 15 ft.*lbf }

    4. Engage each clamp.

    5. Connect each connector.

    6. Engage the 2 claws to connect the room temperature sensor.

  2. CONNECT NO. 2 INSTRUMENT PANEL WIRE

    Click here

  3. INSTALL INSTRUMENT CLUSTER FINISH PANEL ORNAMENT


    1. Engage the 5 clips to install the instrument cluster finish panel ornament.

  4. INSTALL FRONT NO. 2 SPEAKER ASSEMBLY (for RH Side)

    Tech Tips

    Use the same procedure as for the LH side.

    Click here

  5. INSTALL NO. 2 INSTRUMENT PANEL SPEAKER PANEL SUB-ASSEMBLY


    1. A0021XK

      Engage the 2 guides as shown in the illustration.

    2. Engage the 2 clips to install the No. 2 instrument panel speaker panel sub-assembly.

  6. INSTALL FRONT PILLAR GARNISH RH

    Tech Tips

    Use the same procedure as for the LH side.

    Click here

  7. INSTALL FRONT NO. 3 SPEAKER ASSEMBLY

    Click here

  8. INSTALL INSTRUMENT CLUSTER FINISH PANEL ASSEMBLY


    1. Engage the 4 claws and 4 clips to install the instrument cluster finish panel assembly.

  9. INSTALL FRONT NO. 2 SPEAKER ASSEMBLY (for LH Side)

    Click here

  10. INSTALL NO. 1 INSTRUMENT PANEL SPEAKER PANEL SUB-ASSEMBLY


    1. A00234P

      Engage the 2 guides as shown in the illustration.

    2. Engage the 2 clips to install the No. 1 instrument panel speaker panel sub-assembly.

  11. INSTALL FRONT PILLAR GARNISH LH

    Click here

  12. INSTALL MULTI-DISPLAY ASSEMBLY WITH BRACKET

    Click here

  13. INSTALL NO. 2 INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY


    1. A0022J2

      Engage the 3 guides as shown in the illustration.

    2. Engage the 3 claws to install the No. 2 instrument cluster finish panel sub-assembly.

  14. INSTALL CENTER INSTRUMENT PANEL REGISTER ASSEMBLY


    1. Connect the connector.

    2. Engage the 4 clips and 4 claws to install the center instrument panel register assembly.

  15. INSTALL NO. 1 SPEAKER ASSEMBLY WITH BOX

    Click here

  16. INSTALL AIR CONDITIONING CONTROL ASSEMBLY

    Click here

  17. INSTALL RADIO RECEIVER ASSEMBLY WITH BRACKET

    Click here

  18. INSTALL NO. 2 INSTRUMENT PANEL REGISTER ASSEMBLY


    1. Engage the 2 clips and 2 claws.

    2. Engage the claw to install the No. 2 instrument panel register assembly.

  19. INSTALL GLOVE COMPARTMENT DOOR ASSEMBLY


    1. Connect each connector.

    2. Engage the connector clamp.

    3. Engage the 5 claws.

    4. Install the 2 screws<C>.

    5. Open the glove compartment door assembly.

    6. Install the glove compartment door assembly with the 3 screws<C>.

    7. Close the glove compartment door assembly.

  20. INSTALL LOWER NO. 2 INSTRUMENT PANEL AIRBAG ASSEMBLY

    Click here

  21. INSTALL NO. 2 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY


    1. Connect each connector.

    2. A002375N01

      Engage the 2 guides and 4 clips as indicated by the arrows in the order shown in the illustration to install the No. 2 instrument panel under cover sub-assembly.

  22. INSTALL INSTRUMENT SIDE PANEL RH


    1. w/ Airbag Cut Off Switch:


      1. Connect the connector.

    2. A0021C3

      Engage the 2 guides as shown in the illustration.

    3. A002275

      Engage the claw and 4 clips to install the instrument side panel RH as shown in the illustration.

  23. INSTALL FRONT DOOR OPENING TRIM COVER RH

    Tech Tips

    Use the same procedure as for the LH side.

    Click here

  24. INSTALL FRONT DOOR SCUFF PLATE RH

    Tech Tips

    Use the same procedure as for the LH side.

    Click here

  25. ALIGN FRONT WHEELS FACING STRAIGHT AHEAD

  26. INSPECT AND ADJUST SPIRAL CABLE WITH SENSOR SUB-ASSEMBLY

    Click here

  27. INSTALL STEERING WHEEL ASSEMBLY

    Click here

  28. INSTALL HORN BUTTON ASSEMBLY

    Click here

  29. INSTALL NO. 1 INSTRUMENT PANEL REGISTER ASSEMBLY


    1. Engage the 2 clips and 2 claws to install the No. 1 instrument panel register assembly.

  30. INSTALL STEREO COMPONENT EQUALIZER ASSEMBLY (for RHD)

    Click here

  31. INSTALL COMBINATION METER ASSEMBLY

    Click here

  32. INSTALL METER HOOD SUB-ASSEMBLY


    1. Connect the connector.

    2. Engage the 2 claws, 7 clips and 3 guides to temporarily install the meter hood sub-assembly as shown in the illustration.

    3. Engage the 4 clips and 2 claws to install the meter hood sub-assembly.

  33. INSTALL LOWER NO. 1 INSTRUMENT PANEL AIRBAG ASSEMBLY

    Click here

  34. INSTALL SKID CONTROL BUZZER ASSEMBLY (w/ Pre-crash Safety System)

    Click here

  35. INSTALL LOWER INSTRUMENT PANEL FINISH PANEL SUB-ASSEMBLY


    1. Connect each connector.

    2. Engage the 6 claws, 6 clips and guide to install the lower instrument panel finish panel sub-assembly.

  36. CONNECT HOOD LOCK CONTROL LEVER SUB-ASSEMBLY


    1. Engage the claw and 2 guides to connect the hood lock control lever sub-assembly.

  37. INSTALL NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY


    1. Connect each connector.

    2. Engage the connector clamp.

    3. Engage the 3 clips.

    4. Install the No. 1 instrument panel under cover sub-assembly with the 2 screws<C>.

  38. INSTALL INSTRUMENT SIDE PANEL LH


    1. A0021UM

      Engage the 2 guides as shown in the illustration.

    2. A0021UQ

      Engage the claw and 4 clips to install the instrument side panel LH as shown in the illustration.

  39. INSTALL FRONT DOOR OPENING TRIM COVER LH

    Click here

  40. INSTALL FRONT DOOR SCUFF PLATE LH

    Click here

  41. INSTALL CONSOLE BOX ASSEMBLY

    Click here

  42. CONNECT CABLE TO NEGATIVE AUXILIARY BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected.

    Click here

  43. INSTALL BATTERY SERVICE HOLE COVER LH

    Click here

  44. CHECK STEERING WHEEL CENTER POINT

  45. PERFORM DIAGNOSTIC SYSTEM CHECK

    Click here

  46. INSPECT SRS WARNING LIGHT

    Click here

  47. CUSTOMIZE POWER TILT AND POWER TELESCOPIC STEERING COLUMN SYSTEM (for Power Tilt and Power Telescopic Steering Column)

    Click here