AIR CONDITIONING PRESSURE SENSOR INSTALLATION

PROCEDURE


  1. INSTALL AIR CONDITIONER PRESSURE SENSOR


    1. Remove the vinyl tape from the liquid tube sub-assembly A and the connecting part of the air conditioner pressure sensor.

    2. Sufficiently apply compressor oil to a new air conditioner pressure sensor and the fitting surface of the air conditioner pressure sensor.

      Compressor Oil
      ND-OIL 11 or equivalent
    3. A01MTDOC02
      *a Turn
      *b Hold

      Using a 27 mm deep socket wrench, install the air conditioner pressure sensor as shown in the illustration.

      Torque:
      10.8 N*m  { 110 kgf*cm, 8 ft.*lbf }

    4. Connect the connector.

  2. INSTALL LOW PITCHED HORN ASSEMBLY

    Click here

  3. CHARGE AIR CONDITIONING SYSTEM WITH REFRIGERANT

    Click here

  4. WARM UP COMPRESSOR

    Click here

  5. INSPECT FOR REFRIGERANT LEAK

    Click here