REAR SUNSHADE ASSEMBLY REMOVAL

PROCEDURE


  1. REMOVE REAR SEAT ASSEMBLY

    Click here

  2. REMOVE REAR DOOR SCUFF PLATE LH

    Click here

  3. REMOVE REAR DOOR SCUFF PLATE RH

    Tech Tips

    Use the same procedure as for the LH side.

  4. REMOVE REAR SEAT SIDE GARNISH LH

    Click here

  5. REMOVE REAR SEAT SIDE GARNISH RH

    Tech Tips

    Use the same procedure as for the LH side.

  6. REMOVE INNER ROOF SIDE GARNISH ASSEMBLY LH

    Click here

  7. REMOVE INNER ROOF SIDE GARNISH ASSEMBLY RH

    Tech Tips

    Use the same procedure as for the LH side.

  8. REMOVE LUGGAGE COMPARTMENT FLOOR MAT

    Click here

  9. REMOVE FRONT LUGGAGE COMPARTMENT TRIM COVER

    Click here

  10. REMOVE REAR SEAT SUB FLOOR PANEL

    Click here

  11. REMOVE NO. 2 ROOM PARTITION COVER

    Click here

  12. REMOVE NO. 1 ROOM PARTITION COVER

    Tech Tips

    Use the same procedure as for the No. 2 room partition cover.

  13. REMOVE NO. 3 ROOM PARTITION COVER

    Click here

  14. DISCONNECT REAR SEAT 3 POINT TYPE OUTER BELT ASSEMBLY LH

    Click here

  15. DISCONNECT REAR SEAT 3 POINT TYPE OUTER BELT ASSEMBLY RH

    Tech Tips

    Use the same procedure as for the LH side.

  16. REMOVE REAR SEAT SHOULDER BELT HOLE COVER

    Click here

  17. REMOVE PACKAGE TRAY TRIM PANEL ASSEMBLY

    Click here

  18. REMOVE CENTER STOP LIGHT ASSEMBLY WITH COVER

    Click here

  19. REMOVE NO. 2 PACKAGE TRAY TRIM PANEL ASSEMBLY


    1. A00235V

      Disengage the 3 clips and 5 guides, and remove the No. 2 package tray trim panel assembly.

  20. REMOVE REAR WINDOW SHADE ASSEMBLY


    1. A0022NSN02

      Disconnect the connector.

    2. Remove the 4 bolts (A).

    3. Loosen the bolt (B) and remove the rear window shade assembly.

      Note

      Bolt (B) cannot be removed from the rear window shade assembly.

  21. REMOVE REAR SUNSHADE RELAY

    Note

    When disassembling the rear window shade assembly, eliminate static electricity by touching the vehicle body to prevent the components from being damaged.


    1. A0022LB

      Remove the 2 screws.

    2. Disengage the 2 guides to disconnect the link.

    3. A002105

      Remove the 8 screws and rear sunshade relay cover.

    4. A00210B

      Disconnect the connector.

    5. Remove the 2 screws and rear sunshade relay.