ROOF HEADLINING

Click here

INSTALL REAR DOOR OPENING TRIM WEATHERSTRIP LH

*a Alignment Mark (Orange)

Align the alignment mark (orange) on the rear door opening trim weatherstrip LH with the protruding portion on the vehicle body indicated by the arrow in the illustration, and install it.

Note:
After installation, check that the corners fit correctly.

Click here

INSTALL FRONT DOOR OPENING TRIM WEATHERSTRIP LH

*a Alignment Mark (Blue)

Align the alignment mark (blue) on the front door opening trim weatherstrip LH with the protruding portion on the vehicle body indicated by the arrow in the illustration, and install it.

Note:
After installation, check that the corners fit correctly.

Click here

INSTALL REAR DOOR OPENING TRIM WEATHERSTRIP RH

*a Alignment Mark (Light Blue)

Align the alignment mark (light blue) on the rear door opening trim weatherstrip RH with the protruding portion on the vehicle body indicated by the arrow in the illustration, and install it.

Note:
After installation, check that the corners fit correctly.

Click here

INSTALL FRONT DOOR OPENING TRIM WEATHERSTRIP RH

*a Alignment Mark (Red)

Align the alignment mark (red) on the front door opening trim weatherstrip RH with the protruding portion on the vehicle body indicated by the arrow in the illustration, and install it.

Note:
After installation, check that the corners fit correctly.

Click here

INSTALL ROOF HEADLINING ASSEMBLY

*a Clip (Black)

*b Clip (White)

Install the 3 clips to the roof headlining assembly.
Put the roof headlining assembly into the vehicle through the front door LH as shown in the illustration.

Note:
Do not damage the roof headlining assembly or vehicle interior.
*a Base of the Visor Holder - -

for Roof Side (w/o Sliding Roof):
1. Engage the 3 guides.
2. Engage the 2 claws to install each base of the visor holder.
3. Engage the 10 claws and 3 clips to install the roof headlining assembly.

*a	Guide	*b	Fastener
*c	Base of the Visor Holder	-	-

for Roof Side (w/ Sliding Roof):

Engage the 2 guides.
Engage the 2 claws to install each base of the visor holder.
Engage the 10 claws, 3 clips and 8 fasteners to install the roof headlining assembly.
Connect the connector to the sliding roof drive gear sub-assembly.

for Front Pillar LH Side:
1. Engage the 3 clamps.
for Windshield Glass Side:
1. Connect each connector.

Click here

INSTALL VISOR HOLDER

Tip:

Use the same procedure for the LH side and RH side.

Push in the visor holder as shown in the illustration.

Click here

INSTALL VISOR ASSEMBLY LH

Install the visor assembly LH with the 2 screws.

Click here

INSTALL VISOR BRACKET COVER LH

Engage the 4 claws to install the visor bracket cover LH.

Click here

INSTALL VISOR ASSEMBLY RH

Tip:

Use the same procedure as for the LH side.

Click here

INSTALL VISOR BRACKET COVER RH

Tip:

Use the same procedure as for the LH side.

Click here

INSTALL ASSIST GRIP SUB-ASSEMBLY

Tip:

Use the same procedure for the LH side and RH side.

Install the 2 clips to the assist grip.
Temporarily install the 2 new assist grip covers to the assist grip as shown in the illustration.
Engage the 2 clips to install the assist grip sub-assembly.
Engage the 4 claws to install the 2 assist grip covers.

Note:
Make sure that 2 clips are engaged securely.

Click here

INSTALL REAR ASSIST GRIP ASSEMBLY LH

Tip:

Use the same procedure as for the front side.

Click here

INSTALL REAR ASSIST GRIP ASSEMBLY RH

Tip:

Use the same procedure as for the LH side.

Click here

INSTALL SPOT LIGHT ASSEMBLY

Click here

INSTALL MAP LIGHT ASSEMBLY

Click here

INSTALL RAIN SENSOR COVER (w/ Rain Sensor)

Click here

INSTALL NO. 1 FORWARD RECOGNITION COVER (w/ Pre-collision System)

Click here

INSTALL NO. 2 FORWARD RECOGNITION COVER (w/ Pre-collision System)

Click here

INSTALL INNER REAR VIEW MIRROR STAY HOLDER COVER (w/ EC Mirror)

Click here

INSTALL INSTRUMENT PANEL REINFORCEMENT ASSEMBLY WITH AIR CONDITIONING UNIT

Click here

INSTALL INNER ROOF SIDE GARNISH ASSEMBLY LH

Engage the 3 guides.
Engage the 4 clips to install the inner roof side garnish assembly LH.

Click here

INSTALL REAR SEAT SIDE GARNISH LH

Engage the 4 claws and guide to install the rear seat side garnish LH.

Click here

INSTALL INNER ROOF SIDE GARNISH ASSEMBLY RH

Tip:

Use the same procedure as for the LH side.

Click here

INSTALL REAR SEAT SIDE GARNISH RH

Tip:

Use the same procedure as for the LH side.

Click here

INSTALL CENTER PILLAR GARNISH ASSEMBLY LH

Pass the anchor of the front seat outer belt assembly LH through the center pillar garnish assembly LH.
Engage the clip.
Install the center pillar garnish assembly LH with the 2 screws.

Click here

INSTALL LOWER CENTER PILLAR GARNISH LH

Engage the 3 guides, 2 claws and 5 clips to install the lower center pillar garnish LH.

Click here

INSTALL REAR DOOR SCUFF PLATE LH

Engage the 2 guides and 9 claws to install the rear door scuff plate LH.

Click here

INSTALL FRONT PILLAR GARNISH LH

Remove the protective cover.

*1	Front Pillar Garnish Clip	*2	Front Pillar Garnish LH
*a	Correct	*b	Incorrect

Engage the front pillar garnish clip to the front pillar garnish LH.

Tip:

Make sure that the front pillar garnish clip is engaged correctly.

Push the front pillar garnish LH as shown in the illustration to engage the 3 guides.
*1 Front Pillar Garnish Clip

Engage the clip and front pillar garnish clip to install the front pillar garnish LH as shown in the illustration.

Tip:
Make sure that the curtain shield airbag assembly LH is not pinched.