CONDENSER INSTALLATION

PROCEDURE


  1. INSTALL COOLER CONDENSER ASSEMBLY


    1. A00207L

      Engage the 2 guides to install the cooler condenser assembly as shown in the illustration.

    2. A0021X3

      Temporarily install the radiator assembly as shown in the illustration.

    3. Engage the 2 claws.

    4. Install the radiator assembly with the 2 bolts.

      Torque:
      9.0 N*m  { 92 kgf*cm, 80 in.*lbf }

  2. CONNECT NO. 1 COOLER REFRIGERANT DISCHARGE HOSE


    1. Remove the vinyl tape from the No. 1 cooler refrigerant discharge hose and the connecting part of the cooler condenser assembly.

    2. Sufficiently apply compressor oil to a new O-ring and the fitting surface of the hose joint.

      Compressor Oil
      ND-OIL 11 or equivalent

    3. Install the O-ring to the No. 1 cooler refrigerant discharge hose.

    4. Connect the No. 1 cooler refrigerant discharge hose to the cooler condenser assembly with the bolt.

      Torque:
      5.4 N*m  { 55 kgf*cm, 48 in.*lbf }

  3. CONNECT LIQUID TUBE SUB-ASSEMBLY A


    1. Remove the vinyl tape from the liquid tube sub-assembly A and the connecting part of the cooler condenser assembly.

    2. Sufficiently apply compressor oil to a new O-ring and the fitting surface of the tube joint.

      Compressor Oil
      ND-OIL 11 or equivalent

    3. Install the O-ring to the liquid tube sub-assembly A.

    4. Connect the liquid tube sub-assembly A to the cooler condenser assembly with the 2 bolts.

      Torque:
      5.4 N*m  { 55 kgf*cm, 48 in.*lbf }

    5. Engage the claw to close the service hole cover.

  4. INSTALL UPPER RADIATOR SUPPORT SUB-ASSEMBLY

    Click here

  5. CONNECT ENGINE ROOM MAIN WIRE

    Click here

  6. INSTALL HOOD LOCK ASSEMBLY

    Click here

  7. CONNECT HOOD LOCK CONTROL CABLE ASSEMBLY

    Click here

  8. INSTALL HOOD LOCK RELEASE LEVER PROTECTOR

    Click here

  9. INSTALL INLET NO. 1 AIR CLEANER

    Click here

  10. INSTALL MILLIMETER WAVE RADAR SENSOR ASSEMBLY (w/ Dynamic Radar Cruise Control System)

    Click here

  11. INSTALL FRONT BUMPER ASSEMBLY

    for Sport Package: Click here

    for Standard: Click here

  12. CHARGE AIR CONDITIONING SYSTEM WITH REFRIGERANT

    Click here

  13. WARM UP COMPRESSOR

    Click here

  14. INSPECT FOR REFRIGERANT LEAK

    Click here

  15. ADJUST HOOD SUB-ASSEMBLY

    Click here

  16. ADJUST MILLIMETER WAVE RADAR SENSOR ASSEMBLY (w/ Dynamic Radar Cruise Control System)

    Click here