CONDENSER REASSEMBLY

PROCEDURE

1. INSTALL COOLER DRYER

   
   

   1. 

      Using pliers, install a new cooler dryer to the modulator.

   2. 

      Sufficiently apply compressor oil to a new O-ring and the fitting surface of a new cap.

      Compressor Oil
      ND-OIL 11 or equivalent

      Note

      
      

      • Keep the O-ring and O-ring fitting surface free from dirt or foreign matter.

      • Do not use any compressor oil other than ND-OIL 11 or equivalent.

   3. 

      *a

      Modulator

      Using a 14 mm straight hexagon wrench, install the cap to the modulator.

      Torque:

      2.9 N*m  { 30 kgf*cm, 26 in.*lbf }