PTC HEATER ASSEMBLY INSPECTION

PROCEDURE


  1. INSPECT QUICK HEATER ASSEMBLY


    1. B003YR1C03
      *a

      Component without harness connected

      (Quick Heater Assembly)

      Measure the resistance according to the value(s) in the table below.

      Standard Resistance
      Tester Connection Condition Specified Condition
      K13-1 (E) - K13-2 (B) Always Below 1 Ω
      A14-1 (E) - K14-2 (B) Always Below 1 Ω
      K13-1 (E) - A14-1 (E) Always 10 kΩ or higher

      • If the result is not as specified, replace the quick heater assembly.