AIR CONDITIONING SYSTEM INITIALIZATION


  1. INITIALIZATION SERVO MOTOR


    1. Turn the power switch off.

    2. Connect the GTS to the DLC3.

    3. Turn the power switch on (IG).

    4. Press the A/C OFF switch.

    5. Turn the GTS on.

    6. Enter the following menus: Body Electrical / Air Conditioner / Utility / Servomotor Initialization.

    7. According to the GTS display, perform servo motor initialization.


      Body Electrical > Air Conditioner > Utility
      Tester Display
      Servomotor Initialization

      Tech Tips

      During initialization, the AUTO indicator light comes on, and then goes off when initialization has finished.

    8. According to the GTS display, select the Exit switch to finish initialization.