REAR CENTER SEAT OUTER BELT ASSEMBLY INSPECTION

PROCEDURE


  1. INSPECT REAR CENTER SEAT LAP TYPE BELT ASSEMBLY


    1. A011NZHC01
      *a Retractor
      *b Unlock
      *c Lock
      *d 45°

      Before installing the rear center seat lap type belt assembly, check the ELR function.

      Note

      Do not disassemble the retractor.

      When the inclination of the retractor is 15° or less, check that the belt can be pulled from the retractor. When the inclination of the retractor is over 45°, check that the belt locks.

      If the result is not as specified, replace the rear center seat lap type belt assembly.