REAR CENTER SEAT OUTER BELT ASSEMBLY INSTALLATION

CAUTION / NOTICE / HINT

PROCEDURE

1. Click here

   INSPECT REAR CENTER SEAT LAP TYPE BELT ASSEMBLY

   Click here

2. Click here

   INSTALL REAR CENTER SEAT LAP TYPE BELT ASSEMBLY

   
   

   1. Install the rear center seat lap type belt assembly with the nut.

      42 N*m

      428 kgf*cm

      31 ft.*lbf

   2. Check that the ELR locks.

      Note:

      The check should be performed with the rear center seat lap type belt assembly installed.

      
      

      1. With the belt assembly installed, check that the belt locks when it is pulled out quickly.

3. Click here

   INSTALL SEPARATE TYPE REAR SEATBACK COVER WITH PAD

   Click here

4. Click here

   INSTALL REAR SEAT CENTER ARMREST ASSEMBLY

   Click here

5. Click here

   INSTALL REAR SEATBACK BOARD SUB-ASSEMBLY LH

   Click here

6. Click here

   INSTALL REAR UPPER SEATBACK LOCK BEZEL

   Tip:

   Use the same procedure as for the RH side.

   Click here

7. Click here

   INSTALL REAR SEATBACK LOCK COVER LH

   Tip:

   Use the same procedure as for the RH side.

   Click here

8. Click here

   INSTALL REAR SEATBACK LOCK CONTROL BEZEL

   Tip:

   Use the same procedure as for the RH side.

   Click here

9. Click here

   INSTALL REAR SEAT SHOULDER BELT COVER

   Click here

10. Click here

    INSTALL SEAT BELT ANCHOR COVER CAP

    Click here

11. Click here

    INSTALL REAR SEAT HINGE COVER LH

    Tip:

    Use the same procedure as for the RH side.

    Click here

12. Click here

    INSTALL REAR SEATBACK ASSEMBLY LH

    Click here

13. Click here

    INSTALL REAR NO. 1 SEAT INNER BELT ASSEMBLY LH

    Click here

14. Click here

    INSTALL REAR SIDE SEATBACK ASSEMBLY LH

    Tip:

    Use the same procedure as for the RH side.

    Click here

15. Click here

    INSTALL REAR SEAT CENTER HEADREST ASSEMBLY

    Click here

16. Click here

    INSTALL REAR SEAT HEADREST ASSEMBLY

    
    

    1. Install the rear seat headrest assembly.

17. Click here

    INSTALL REAR SEAT CUSHION LOCK HOOK

    Click here

18. Click here

    INSTALL REAR SEAT CUSHION ASSEMBLY

    Click here

19. Click here

    CONNECT CABLE TO NEGATIVE AUXILIARY BATTERY TERMINAL (w/ Rear Seat Side Airbag)

    Note:

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected.

    Click here

20. Click here

    INSTALL BATTERY SERVICE HOLE COVER LH (w/ Rear Seat Side Airbag)

    Click here

21. Click here

    INSPECT SRS WARNING LIGHT (w/ Rear Seat Side Airbag)

    Click here