REAR SEAT OUTER BELT ASSEMBLY INSPECTION

PROCEDURE


  1. INSPECT REAR SEAT 3 POINT TYPE OUTER BELT ASSEMBLY


    1. A011Q9ZC01
      *A w/ Pretensioner
      *B w/o Pretensioner
      *a Retractor
      *b Unlock
      *c Lock
      *d 45°

      Before installing the rear seat 3 point type outer belt assembly, check the ELR function.

      Note

      Do not disassemble the retractor.


      1. When the inclination of the retractor is 15° or less, check that the belt can be pulled from the retractor. When the inclination of the retractor is over 45°, check that the belt locks.

        If the result is not as specified, replace the rear seat 3 point type outer belt assembly.