REAR SEAT OUTER BELT ASSEMBLY REMOVAL

PROCEDURE


  1. REMOVE REAR SEAT ASSEMBLY (for Fixed Seat Type)

    Click here

  2. REMOVE REAR SEAT ASSEMBLY (for Fold Down Seat Type)

    Click here

  3. REMOVE REAR DOOR SCUFF PLATE LH

    Click here

  4. REMOVE REAR DOOR SCUFF PLATE RH

    Tech Tips

    Use the same procedure as for the LH side.

  5. REMOVE REAR SEAT SIDE GARNISH LH

    Click here

  6. REMOVE REAR SEAT SIDE GARNISH RH

    Tech Tips

    Use the same procedure as for the LH side.

  7. REMOVE INNER ROOF SIDE GARNISH ASSEMBLY LH

    Click here

  8. REMOVE INNER ROOF SIDE GARNISH ASSEMBLY RH

    Tech Tips

    Use the same procedure as for the LH side.

  9. REMOVE LUGGAGE COMPARTMENT FLOOR MAT (for Fold Down Seat Type)

    Click here

  10. REMOVE FRONT LUGGAGE COMPARTMENT TRIM COVER (for Fold Down Seat Type)

    Click here

  11. REMOVE REAR SEAT SUB FLOOR PANEL (for Fold Down Seat Type)


    1. A0022XZ

      Disengage the 3 clips to remove the rear seat sub floor panel.

  12. REMOVE NO. 2 ROOM PARTITION COVER (for Fold Down Seat Type)


    1. A0022JL

      Remove the clip.

    2. Disengage the 2 claws and clip.

    3. Disengage the guide to remove the No. 2 room partition cover.

  13. REMOVE NO. 1 ROOM PARTITION COVER (for Fold Down Seat Type)

    Tech Tips

    Use the same procedure as for the No. 2 room partition cover.

  14. REMOVE NO. 3 ROOM PARTITION COVER (for Fold Down Seat Type)


    1. A0021P5

      Disengage the 5 clips and remove the No. 3 room partition cover.

  15. DISCONNECT REAR SEAT 3 POINT TYPE OUTER BELT ASSEMBLY LH


    1. A0020GO

      Remove the bolt and disconnect the floor anchor of the rear seat 3 point type outer belt assembly LH.

  16. DISCONNECT REAR SEAT 3 POINT TYPE OUTER BELT ASSEMBLY RH

    Tech Tips

    Use the same procedure as for the LH side.

  17. DISCONNECT REAR SEAT INNER WITH CENTER BELT ASSEMBLY LH (for Fixed Seat Type)

    Click here

  18. REMOVE REAR SEAT SHOULDER BELT HOLE COVER

    Tech Tips

    Use the same procedure for all rear seat shoulder belt hole covers.


    1. A0021JV

      Using a moulding remover, disengage the 2 claws and 2 guides, and remove the rear seat shoulder belt hole cover.

  19. REMOVE CENTER STOP LIGHT ASSEMBLY WITH COVER (w/o Rear Sunshade)

    Click here

  20. REMOVE PACKAGE TRAY TRIM PANEL ASSEMBLY (w/o Rear Sunshade)

    A002154

    1. Using a clip remover, remove the 4 clips.

    2. Disengage the 3 clips and 5 guides.

    3. for Fixed Seat Type:


      1. Pass the 3 rear seat belt floor anchors through the holes of the package tray trim panel assembly then remove the package tray trim panel assembly.

    4. for Fold Down Seat Type:


      1. Pass the 2 rear seat belt floor anchors through the holes of the package tray trim panel assembly then remove the package tray trim panel assembly.

  21. REMOVE PACKAGE TRAY TRIM PANEL ASSEMBLY (w/ Rear Sunshade)


    1. A0022QB

      Using a clip remover, remove the 4 clips.

    2. Disengage the 3 clips and guide.

    3. Pass the 2 rear seat belt floor anchors through the holes of the package tray trim panel assembly then remove the package tray trim panel assembly.

  22. REMOVE REAR SEAT 3 POINT TYPE OUTER BELT ASSEMBLY

    A00218H

    1. w/o Pretensioner:


      1. Remove the bolt.

      2. Disengage the guide to remove the rear seat 3 point type outer belt assembly.

    2. A0021UNC01
      *a Protective Tape
      *b Locking Button
      *c Release

      w/ Pretensioner:


      1. Using a screwdriver, pull out the locking button as shown in the illustration to release the lock and disconnect the pretensioner connector as shown in the illustration.

        Tech Tips

        Tape the screwdriver tip before use.

      2. Remove the 2 bolts and rear seat 3 point type outer belt assembly.