FRONT SEAT INNER BELT ASSEMBLY INSTALLATION

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for the RH side and LH side.

  • The following procedure is for the LH side.

PROCEDURE


  1. INSTALL FRONT SEAT INNER BELT ASSEMBLY


    1. A011OTNC01
      *a Protruding Part

      Install the front seat inner belt assembly with the nut.

      Torque:
      42 N*m  { 428 kgf*cm, 31 ft.*lbf }

      Note

      Do not allow the anchor part of the front seat inner belt assembly to overlap the protruding part of the front seat adjuster.

    2. Engage the clamp.

    3. Connect each connector.

    4. Engage each clamp under the front seat assembly.

  2. INSTALL NO. 1 SEAT SLIDE POSITION SENSOR PROTECTOR (for Manual Seat) (for Driver Side)

    Click here

  3. INSTALL FRONT SEAT ASSEMBLY (for Manual Seat)

    Click here

  4. INSTALL FRONT SEAT ASSEMBLY (for Power Seat)

    Click here