SEAT BELT WARNING SYSTEM CUSTOMIZE PARAMETERS


  1. CUSTOMIZE SEAT BELT WARNING SYSTEM

    Tech Tips

    The following items can be customized.

    Note


    • When the customer requests a change in a function, first make sure that the function can be customized.

    • Be sure to make a note of the current settings before customizing.

    • When troubleshooting a function, first make sure that the function is set to the default setting.

    • These buzzers should be ON for safe driving. Perform this procedure only if it is necessary to set the buzzer to OFF (disabled).


    1. Customizing with the GTS


      1. Connect the GTS to the DLC3.

      2. Turn the power switch on (IG).

      3. Turn the GTS on.

      4. Enter the following menus: Customize Setting / Warning.

      5. Select the setting by referring to the table below.


        Warning
        Tester Display Description Default Setting ECU
        Driver Side Seatbelt Warning Buzzer Function to sound the driver seat belt warning buzzer ON 0:OFF,1:ON Combination meter assembly
        Front Passenger Side Seatbelt Warning Buzzer Function to sound the front passenger seat belt warning buzzer ON 0:OFF,1:ON Combination meter assembly
        Rear Seatbelt Warning Buzzer Function to sound the rear seat belt warning buzzer* ON 0:OFF,1:ON Combination meter assembly

        • *: w/ Rear Seat Belt Warning

        Tech Tips

        This setting is only valid when the vehicle is driven at 20 km/h (12 mph) or more.