FRONT SEAT CUSHION HEATER(for Power Seat) INSTALLATION

CAUTION / NOTICE / HINT

CAUTION:

Wear protective gloves. Sharp areas on the seat frame and adjuster may injure your hands.

Tech Tips


  • Use the same procedure for the RH side and LH side.

  • The following procedure is for the LH side.

PROCEDURE


  1. INSTALL FRONT SEAT CUSHION HEATER (SEPARATE TYPE FRONT SEAT CUSHION COVER) (for Standard Seat Type)

    Tech Tips

    The front seat cushion heater cannot be removed from the separate type front seat cushion cover as they are a unit.


    1. A011NZP

      Using hog ring pliers, install the front seat cushion heater (separate type front seat cushion cover) to the separate type front seat cushion pad with 18 new hog rings.

      Note


      • Be careful not to damage the separate type front seat cushion cover.

      • Be sure to securely install the hog rings as shown in the illustration while preventing wrinkles from forming on the separate type front seat cushion cover.

    2. A011QJE

      Using hog ring pliers, install 3 new hog rings.

      Note


      • Be careful not to damage the separate type front seat cushion cover.

      • Be sure to securely install the hog rings as shown in the illustration while preventing wrinkles from forming on the separate type front seat cushion cover.

  2. INSTALL SEPARATE TYPE FRONT SEAT CUSHION COVER WITH PAD (for Standard Seat Type)


    1. Temporarily install the separate type front seat cushion cover with pad.

    2. A011N5Q

      Engage the 12 hooks.

    3. A011PTK

      for Front Passenger Side:


      1. Engage the claw to install the connector.

    4. A011O06

      Connect the 2 connectors.

    5. Engage the 3 clamps.

    6. A011NJY

      Engage the clamp.

    7. Connect the connector.

    8. A00228IC01
      B003Y0W Fastener

      Engage the fastener to secure the front seat airbag assembly wire harness.

  3. INSTALL FRONT SEAT CUSHION HEATER (FRONT SEAT CUSHION PAD WITH COVER) (for Sports Seat Type)

    Tech Tips

    The front seat cushion heater cannot be removed from the front seat cushion pad with cover as they are a unit.


    1. Temporarily install the front seat cushion heater (front seat cushion pad with cover).

      Note

      Be careful not to damage the front seat cushion pad with cover.

    2. A011N5Q

      Engage the 12 hooks.

    3. A011PTK

      for Front Passenger Side:


      1. Engage the claw to install the connector.

    4. A011O06

      Connect the 2 connectors.

    5. Engage the 3 clamps.

    6. A011NJY

      Engage the clamp.

    7. Connect the connector.

    8. A00228IC01
      B003Y0W Fastener

      Engage the fastener to secure the front seat airbag assembly wire harness.

  4. INSTALL FRONT SEAT INNER CUSHION SHIELD

    Click here

  5. INSTALL FRONT SEAT CUSHION SHIELD

    Click here

  6. INSTALL FRONT SEAT INNER NO. 1 CUSHION SHIELD

    Click here

  7. CONNECT SEPARATE TYPE FRONT SEATBACK COVER (for Standard Seat Type)

    Click here

  8. CONNECT FRONT SEATBACK PAD WITH COVER (for Sports Seat Type)

    Click here

  9. INSTALL FRONT SEAT ASSEMBLY

    Click here