Click here

FRONT SEAT CUSHION HEATER(for Manual Seat) INSTALLATION

Click here
Click here

CAUTION / NOTICE / HINT

CAUTION:

Wear protective gloves. Sharp areas on the seat frame and adjuster may injure your hands.

Tip:

  • Use the same procedure for the RH side and LH side.

  • The following procedure is for the LH side.

Click here

PROCEDURE


  1. Click here

    INSTALL FRONT SEAT CUSHION HEATER (SEPARATE TYPE FRONT SEAT CUSHION COVER)

    Tip:

    The front seat cushion heater cannot be removed from the separate type front seat cushion cover as they are a unit.


    1. A011NZP

      Using hog ring pliers, install the front seat cushion heater (separate type front seat cushion cover) to the separate type front seat cushion pad with 18 new hog rings.

      Note:

      • Be careful not to damage the separate type front seat cushion cover.

      • Be sure to securely install the hog rings as shown in the illustration while preventing wrinkles from forming on the separate type front seat cushion cover.

    2. A011PHR

      Using hog ring pliers, install 2 new hog rings.

      Note:

      • Be careful not to damage the separate type front seat cushion cover.

      • Be sure to securely install the hog rings as shown in the illustration while preventing wrinkles from forming on the separate type front seat cushion cover.

  2. Click here

    INSTALL SEPARATE TYPE FRONT SEAT CUSHION COVER WITH PAD


    1. Temporarily install the separate type front seat cushion cover with pad.

    2. A011Q3R

      Engage the 11 hooks.

    3. for Front Passenger Side:


      1. A011PTK

        Engage the claw to install the connector.

    4. A011LZY

      Connect the 2 connectors.

    5. Engage the 3 clamps.

    6. A011NJY

      Engage the clamp.

    7. Connect the connector.

    8. A011PXKC01
      B003Y0W Fastener

      Engage the fastener to secure the front seat airbag assembly wire harness.

  3. Click here

    INSTALL FRONT SEAT INNER CUSHION SHIELD

    Click here

  4. Click here

    INSTALL FRONT SEAT CUSHION SHIELD

    Click here

  5. Click here

    INSTALL VERTICAL SEAT RELEASE ARM

    Click here

  6. Click here

    INSTALL SEAT ADJUSTER COVER

    Click here

  7. Click here

    INSTALL VERTICAL ADJUSTING HANDLE

    Click here

  8. Click here

    INSTALL RECLINING ADJUSTER RELEASE HANDLE

    Click here

  9. Click here

    CONNECT SEPARATE TYPE FRONT SEATBACK COVER

    Click here

  10. Click here

    INSTALL FRONT SEAT ASSEMBLY

    Click here