FRONT SEAT CUSHION HEATER(for Manual Seat) INSPECTION

PROCEDURE


  1. INSPECT SEPARATE TYPE FRONT SEAT CUSHION COVER


    1. A011OTUC09
      *A for Front Right Seat
      *B for Front Left Seat
      *a

      Component without harness connected

      (Separate Type Front Seat Cushion Cover)

      Measure the resistance according to the value(s) in the table below.

      Standard Resistance
      for Front Right Seat
      Tester Connection Condition Specified Condition
      a9-2 - B-1 Always Below 1 Ω
      a9-5 - B-2 Always Below 1 Ω
      a9-1 - a9-7 Seat heater temperature 15 to 30°C (59 to 86°F) 6.1 to 13.3 kΩ
      B-5 - a9-3 Always Below 1 Ω
      B-3 - a9-3 Always 2.56 to 3.14 Ω
      B-3 - C-1 Always Below 1 Ω
      C-2 - a9-3 Always Below 1 Ω
      for Front Left Seat
      Tester Connection Condition Specified Condition
      b5-2 - D-1 Always Below 1 Ω
      b5-5 - D-2 Always Below 1 Ω
      b5-1 - b5-7 Seat heater temperature 15 to 30°C (59 to 86°F) 6.1 to 13.3 kΩ
      D-5 - b5-3 Always Below 1 Ω
      D-3 - b5-3 Always 2.56 to 3.14 Ω
      D-3 - E-1 Always Below 1 Ω
      E-2 - b5-3 Always Below 1 Ω

      If the result is not as specified, replace the separate type front seat cushion cover.