FRONT SEATBACK HEATER(for Power Seat) INSTALLATION

CAUTION / NOTICE / HINT

CAUTION:

Wear protective gloves. Sharp areas on the seat frame and adjuster may injure your hands.

Tech Tips


  • Use the same procedure for the RH side and LH side.

  • The following procedure is for the LH side.

PROCEDURE


  1. INSTALL FRONT SEATBACK HEATER (SEPARATE TYPE FRONT SEATBACK COVER) (for Standard Seat Type)

    Tech Tips

    The front seatback heater cannot be removed from the separate type front seatback cover as they are a unit.


    1. A011OJM

      Using hog ring pliers, install the front seatback heater (separate type front seatback cover) to the separate type front seatback pad with 14 new hog rings.

      Note


      • Be careful not to damage the separate type front seatback cover.

      • Be sure to securely install the hog rings as shown in the illustration while preventing wrinkles from forming on the separate type front seatback cover.

    2. A011M5IC01
      B003Y0W Fastener

      Engage the 2 fasteners.

  2. INSTALL SEPARATE TYPE FRONT SEATBACK COVER WITH PAD (for Standard Seat Type)

    Click here

  3. INSTALL FRONT SEATBACK HEATER (FRONT SEATBACK PAD WITH COVER) (for Sports Seat Type)

    Tech Tips

    The front seatback heater cannot be removed from the front seatback pad with cover as they are a unit.


    1. Temporarily install the front seatback heater (front seatback pad with cover).

      Note

      Be careful not to damage the front seatback pad with cover .

    2. A011LXZC01
      *a Bracket

      Engage the 2 brackets and install the 2 nuts.

      Torque:
      5.5 N*m  { 56 kgf*cm, 49 in.*lbf }

      Note


      • For vehicles with a front seat airbag assembly, the front seatback pad with cover must be securely installed. Otherwise, the front seat airbag assembly may not deploy properly.

      • Make sure that the strap is not twisted after installing the nut.

      • Install the brackets securely.

    3. w/ Climate Control Seat System:


      1. Engage the 2 claws to install the seatback climate control blower to the front seatback pad with cover.

    4. A011NJY

      Engage the clamp.

    5. Connect the connector.

  4. INSTALL FRONT SEAT HEADREST SUPPORT

    Click here

  5. INSTALL FRONT SEAT INNER CUSHION SHIELD

    Click here

  6. INSTALL FRONT SEAT CUSHION SHIELD

    Click here

  7. INSTALL FRONT SEAT INNER NO. 1 CUSHION SHIELD

    Click here

  8. CONNECT SEPARATE TYPE FRONT SEATBACK COVER (for Standard Seat Type)

    Click here

  9. CONNECT FRONT SEATBACK PAD WITH COVER (for Sports Seat Type)

    Click here

  10. INSTALL FRONT SEAT ASSEMBLY

    Click here