FRONT SEATBACK HEATER(for Manual Seat) INSTALLATION

CAUTION / NOTICE / HINT

CAUTION:

Wear protective gloves. Sharp areas on the seat frame and adjuster may injure your hands.

Tech Tips


  • Use the same procedure for the RH side and LH side.

  • The following procedure is for the LH side.

PROCEDURE


  1. INSTALL FRONT SEATBACK HEATER (SEPARATE TYPE FRONT SEATBACK COVER)

    Tech Tips

    The front seatback heater cannot be removed from the separate type front seatback cover as they are a unit.


    1. A011OJM

      Using hog ring pliers, install the front seatback heater (separate type front seatback cover) to the separate type front seatback pad with 14 new hog rings.

      Note


      • Be careful not to damage the separate type front seatback cover.

      • Be sure to securely install the hog rings as shown in the illustration while preventing wrinkles from forming on the separate type front seatback cover.

    2. A011M5IC01
      B003Y0W Fastener

      Engage the 2 fasteners.

  2. INSTALL SEPARATE TYPE FRONT SEATBACK COVER WITH PAD


    1. A011MMRC01
      *a Bracket

      Temporarily install the separate type front seatback cover with pad.

    2. Engage the 3 brackets and install the 2 nuts.

      Torque:
      5.5 N*m  { 56 kgf*cm, 49 in.*lbf }

      Note


      • For vehicles with a front seat airbag assembly, the separate type front seatback cover with pad must be securely installed. Otherwise, the front seat airbag assembly may not deploy properly.

      • Make sure that the strap is not twisted after installing the nut.

      • Install the brackets securely.

    3. A011NJY

      Engage the clamp.

    4. Connect the connector.

  3. INSTALL FRONT SEAT HEADREST SUPPORT

    Click here

  4. INSTALL FRONT SEAT INNER CUSHION SHIELD

    Click here

  5. INSTALL FRONT SEAT CUSHION SHIELD

    Click here

  6. INSTALL VERTICAL SEAT RELEASE ARM

    Click here

  7. INSTALL SEAT ADJUSTER COVER

    Click here

  8. INSTALL VERTICAL ADJUSTING HANDLE

    Click here

  9. INSTALL RECLINING ADJUSTER RELEASE HANDLE

    Click here

  10. CONNECT SEPARATE TYPE FRONT SEATBACK COVER

    Click here

  11. INSTALL FRONT SEAT ASSEMBLY

    Click here