REAR SEAT ASSEMBLY(for Fold Down Seat Type) REASSEMBLY

CAUTION / NOTICE / HINT

CAUTION:

Wear protective gloves. Sharp areas on the seat frame may injure your hands.

PROCEDURE


  1. INSTALL CHILD RESTRAINT SEAT BELT CAP LH


    1. A011LZS

      Engage the guide to install the child restraint seat belt cap LH.

      Tech Tips

      Use the same procedure for the other 3 child restraint seat belt caps LH.

  2. INSTALL BENCH TYPE REAR SEAT CUSHION COVER


    1. Temporarily install the bench type rear seat cushion cover to the bench type rear seat cushion pad.

    2. Using hog ring pliers, install 32 new hog rings.

      A011MDL

      Note


      • Be careful not to damage the bench type rear seat cushion cover.

      • Be sure to securely install the hog rings as shown in the illustration while preventing wrinkles from forming on the bench type rear seat cushion cover.

    3. Using hog ring pliers, install the bench type rear seat cushion cover to the bench type rear seat cushion pad with 56 new hog rings.

      A011OEY

      Note


      • Be careful not to damage the bench type rear seat cushion cover.

      • Be sure to securely install the hog rings as shown in the illustration while preventing wrinkles from forming on the bench type rear seat cushion cover.

  3. INSTALL CHILD RESTRAINT SEAT BELT CAP RH


    1. A011QGS

      Engage the 4 claws to install the child restraint seat belt cap RH.

      Tech Tips

      Use the same procedure for the other 3 child restraint seat belt caps RH.

  4. INSTALL REAR SEATBACK LOCK SUB-ASSEMBLY RH (for RH Side)


    1. A011OA3C05
      B003XUN Screw
      B003YHT Bolt

      Engage the guide.

    2. Install the rear seatback lock sub-assembly RH to the rear seatback frame sub-assembly RH with the 2 bolts and 2 screws.

      Torque:
      21 N*m  { 214 kgf*cm, 15 ft.*lbf }

  5. INSTALL REAR SEAT LOCK CONTROL LEVER SUB-ASSEMBLY RH (for RH Side)


    1. A011OXI

      Engage the 4 guides.

    2. Install the rear seat lock control lever sub-assembly RH with the screw.

    3. A011N0I

      Engage the lock clip as shown in the illustration.

  6. INSTALL REAR SEATBACK LOCK STRIKER PROTECTOR (for RH Side)


    1. A011QDB

      Engage the guide to install the rear seatback lock striker protector with the 3 screws.

  7. INSTALL SEPARATE TYPE REAR SEATBACK COVER RH (for RH Side)


    1. Temporarily install the separate type rear seatback cover RH to the separate type rear seatback pad RH.

    2. A011MNC

      Using hog ring pliers, install the separate type rear seatback cover RH to the separate type rear seatback pad RH with 8 new hog rings.

      Note


      • Be careful not to damage the separate type rear seatback cover RH.


      • Be sure to securely install the hog rings as shown in the illustration while preventing wrinkles from forming on the separate type rear seatback cover RH.

  8. INSTALL SEPARATE TYPE REAR SEATBACK COVER WITH PAD (for RH Side)


    1. A011PLVN01

      Install the separate type rear seatback cover with pad as indicated by the arrows, in the order shown in the illustration.

    2. A011NN9

      Engage the 4 claws to install the 2 rear seat headrest supports.

  9. INSTALL REAR SEATBACK BOARD SUB-ASSEMBLY RH (for RH Side)


    1. A011QAH

      Engage the 7 claws to install the rear seatback board sub-assembly RH.

    2. A011NS7

      Engage the 23 claws of the separate type rear seatback cover RH to the rear seatback board sub-assembly RH.

  10. INSTALL REAR UPPER SEATBACK LOCK BEZEL (for RH Side)


    1. A011NV5

      Engage the 5 claws to install the rear upper seatback lock bezel.

  11. INSTALL REAR SEATBACK LOCK COVER RH (for RH Side)


    1. A011OVZ

      Engage the 2 guides.

    2. Engage the 2 claws to install the rear seatback lock cover RH.

  12. INSTALL REAR SEATBACK LOCK CONTROL BEZEL (for RH Side)


    1. A011PAM

      Engage the 2 claws to install the rear seatback lock control bezel.

  13. INSTALL REAR SEAT HINGE COVER RH (for RH Side)


    1. A011NQO

      Engage the 2 guides to install the rear seat hinge cover RH to the rear seat hinge sub-assembly RH.

    2. A011OP2

      Tighten the bolt to install the rear seat hinge cover RH with the rear seat hinge sub-assembly RH to the separate type rear seatback cover with pad.

      Torque:
      18 N*m  { 184 kgf*cm, 13 ft.*lbf }

  14. INSTALL REAR SEATBACK BRACKET (for LH Side)


    1. A011NKK

      Install the rear seatback bracket to the rear seatback frame sub-assembly LH with the 2 nuts.

      Torque:
      28 N*m  { 286 kgf*cm, 21 ft.*lbf }

  15. INSTALL REAR SEATBACK LOCK SUB-ASSEMBLY LH (for LH Side)

    Tech Tips

    Use the same procedure as for the RH side.

  16. INSTALL REAR SEAT LOCK CONTROL LEVER SUB-ASSEMBLY LH (for LH Side)

    Tech Tips

    Use the same procedure as for the RH side.

  17. INSTALL REAR SEATBACK LOCK STRIKER PROTECTOR (for LH Side)

    Tech Tips

    Use the same procedure as for the RH side.

  18. INSTALL REAR CENTER SEAT LAP TYPE BELT ASSEMBLY (for LH Side)

    Click here

  19. INSTALL SEPARATE TYPE REAR SEATBACK COVER LH (for LH Side)


    1. Temporarily install the separate type rear seatback cover LH to the separate type rear seatback pad LH.

    2. A011PSV

      Using hog ring pliers, install 8 new hog rings.

      Note


      • Be careful not to damage the separate type rear seatback cover LH.


      • Be sure to securely install the hog rings as shown in the illustration while preventing wrinkles from forming on the separate type rear seatback cover LH.

    3. A011PTM

      Using hog ring pliers, install the separate type rear seatback cover LH to the separate type rear seatback pad LH with 8 new hog rings.

      Note


      • Be careful not to damage the separate type rear seatback cover LH.


      • Be sure to securely install the hog rings as shown in the illustration while preventing wrinkles from forming on the separate type rear seatback cover LH.

  20. INSTALL SEPARATE TYPE REAR SEATBACK COVER WITH PAD (for LH Side)


    1. A011NQAC02
      *a Rubber Band

      Pass the rear center seat lap type belt assembly through the separate type rear seatback cover with pad.

    2. Install the separate type rear seatback cover with pad as indicated by the arrows, in the order shown in the illustration.

    3. Connect the rear center seat lap type belt assembly to the rubber band of the separate type rear seatback cover with pad.

    4. A011MEB

      Engage the 4 claws to install the 2 rear seat headrest supports.

    5. A011Q4E

      Engage the 4 claws to install the 2 rear seat headrest supports.

  21. INSTALL REAR SEAT CENTER ARMREST CUP HOLDER SUB-ASSEMBLY (for LH Side)


    1. A011NS5

      Engage the 2 guides.

    2. A011P0M

      Install the rear seat center armrest cup holder sub-assembly with the 2 screws.

    3. A011Q8Y

      Engage the 2 hooks as shown in the illustration.

  22. INSTALL CENTER ARMREST HINGE COVER (for LH Side)


    1. A011QG8

      Engage the 6 guides to install the center armrest hinge cover to the center armrest hinge.

    2. A011QIK

      Engage the 2 guides.

    3. Install the 2 bushes and 2 bolts to the center armrest hinge cover with center armrest hinge.

      Torque:
      4.6 N*m  { 47 kgf*cm, 41 in.*lbf }

  23. INSTALL CENTER ARMREST HINGE COVER LH (for LH Side)


    1. A011QAD

      Engage the 2 guides.

    2. Engage the 2 claws to install the center armrest hinge cover LH.

  24. INSTALL REAR SEAT CENTER ARMREST ASSEMBLY (for LH Side)


    1. A011NZ2

      Engage the 2 guides.

    2. Install the rear seat center armrest assembly with the 2 nuts.

      Torque:
      28 N*m  { 286 kgf*cm, 21 ft.*lbf }

  25. INSTALL REAR SEATBACK BOARD SUB-ASSEMBLY LH (for LH Side)


    1. A011PJU

      Engage the 10 claws to install the rear seatback board sub-assembly LH.

    2. A011MKP

      Engage the 27 claws of the separate type rear seatback cover LH to the rear seatback board sub-assembly LH.

  26. INSTALL REAR UPPER SEATBACK LOCK BEZEL (for LH Side)

    Tech Tips

    Use the same procedure as for the RH side.

  27. INSTALL REAR SEATBACK LOCK COVER LH (for LH Side)

    Tech Tips

    Use the same procedure as for the RH side.

  28. INSTALL REAR SEATBACK LOCK CONTROL BEZEL (for LH Side)

    Tech Tips

    Use the same procedure as for the RH side.

  29. INSTALL REAR SEAT SHOULDER BELT COVER (for LH Side)


    1. A011P1V

      Connect the rear seat shoulder belt cover to the rear center seat lap type belt assembly as shown in the illustration.

    2. A011PVM

      Engage the 2 guides and 2 claws to install the rear seat shoulder belt cover.

  30. INSTALL SEAT BELT ANCHOR COVER CAP (for LH Side)


    1. A011MS1

      Engage the 2 claws to install the seat belt anchor cover cap.

  31. INSTALL REAR SEAT HINGE COVER LH (for LH Side)

    Tech Tips

    Use the same procedure as for the RH side.

  32. INSTALL REAR SEAT SHOULDER BELT GUIDE RH


    1. A011P64

      Engage the guide.

    2. Install the rear seat shoulder belt guide RH to the rear side seatback pad with frame RH with the 2 screws.

  33. INSTALL REAR SEAT SHOULDER BELT GUIDE LH

    Tech Tips

    Use the same procedure as for the RH side.