Click here

FRONT POWER SEAT CONTROL SYSTEM(w/ Memory) Wireless Transmitter Memory Function does not Operate

Click here
Click here
DTC Code DTC Name
  Wireless Transmitter Memory Function does not Operate
Click here

DESCRIPTION

With the power switch on (IG) and the driver door closed, pressing the manual lock or unlock switch on the multiplex network master switch assembly while holding a seat memory switch (driver door) (M1, M2 or M3 switch) will register the transmitter recognition code into the seat memory switch (driver door) that was pressed. After registration is completed, the answer back buzzer sounds.

Click here

CAUTION / NOTICE / HINT

Note:

  • The seat position will not be stored if the SET switch and 2 or more of the seat memory switches (for example, M1 switch and M2 switch) are pressed simultaneously.

    If a memorizing operation has failed, release all switches. The seat memory function does not operate unless the switches are released.

  • The seat will not return to the memorized position if 2 or more of the seat memory switches (for example, M1 switch and M2 switch) are pressed simultaneously.

    If a restoring operation has failed, release all switches. The seat memory restoring function does not operate unless the switches are released.

  • The front power seat control system (w/ Memory) uses the CAN communication system. First, confirm that there is no malfunction in the CAN communication system. Refer to the How to Proceed with Troubleshooting procedure.

    Click here

  • Before replacing the main body ECU (multiplex network body ECU) or certification ECU (smart key ECU assembly), refer to Service Bulletin.

Click here

PROCEDURE


  1. Click here

    CHECK POWER DOOR LOCK CONTROL SYSTEM


    1. Check the manual lock/unlock function by using the door control switch (multiplex network master switch assembly).

      Click here

      OK
      Manual lock/unlock function operates normally.
      Result
      Proceed to
      OK
      NG

  2. Click here

    CHECK ENTRY AND START SYSTEM (for Start Function)


    1. Check that the hybrid control system starts normally when the power switch is pressed while carrying the key and with the brake pedal depressed.

      OK
      Hybrid control system starts normally.
      Result
      Proceed to
      OK
      NG

  3. Click here

    CHECK SEAT POSITION MEMORY AND RESTORING FUNCTION


    1. Check the seat position memory and restoring function.

      Click here

      Result
      Result Proceed to
      OK A
      NG (seat position memory function does not operate normally) B
      NG (seat position restoring function does not operate normally) C

    • AClick here
    • B

      GO TO OTHER DIAGNOSIS PROCEDURE (Power Seat Position is not Memorized)Click here

    • C

      GO TO OTHER DIAGNOSIS PROCEDURE (Power Seat does not Return to Memorized Position)Click here

  4. Click here

    READ VALUE USING GTS (DRIVER DOOR COURTESY SWITCH)


    1. Connect the GTS to the DLC3.

    2. Turn the power switch on (IG).

    3. Turn the GTS on.

    4. Enter the following menus: Body Electrical / Main Body / Data List.

    5. Read the Data List according to the display on the GTS.


      1. Body Electrical > Main Body > Data List
        Tester Display Measurement Item Range Normal Condition Diagnostic Note
        FR Door Courtesy SW Front door courtesy light switch assembly (driver door) signal*2 ON or OFF

        ON: Driver door open

        OFF: Driver door closed

        		 -
        FL Door Courtesy SW Front door courtesy light switch assembly (driver door) signal*1 ON or OFF

        ON: Driver door open

        OFF: Driver door closed

        		 -




      • *1: for LHD

      • *2: for RHD


      1. Body Electrical > Main Body > Data List
        Tester Display
        FR Door Courtesy SW
        FL Door Courtesy SW





      OK
      ON or OFF appears on the screen according to the driver door condition.
      Result
      Proceed to
      OK
      NG

  5. Click here

    CHECK MEMORY CALL FUNCTION (MEMORY REGISTRATION)


    1. Check the memory registration of the memory call function.

      Click here

      OK
      Memory registration operates normally.
      Result
      Proceed to
      OK
      NG

  6. Click here

    READ VALUE USING GTS (MEMORY CALL REGISTRATION)


    1. Connect the GTS to the DLC3.

    2. Turn the power switch on (IG).

    3. Turn the GTS on.

    4. Enter the following menus: Body Electrical / Main Body / Data List.

    5. Read the Data List according to the display on the GTS.


      1. Body Electrical > Main Body > Data List
        Tester Display Measurement Item Range Normal Condition Diagnostic Note
        Mem SW No. w/KeyID1 Memory switch linked with key ID1 NONE, MEM SW1, MEM SW2 or MEM SW3

        NONE: No switches linked with key ID1

        MEM SW1: M1 switch linked with key ID1

        MEM SW2: M2 switch linked with key ID1

        MEM SW3: M3 switch linked with key ID1

        		 -
        Mem SW No. w/KeyID2 Memory switch linked with key ID2 NONE, MEM SW1, MEM SW2 or MEM SW3

        NONE: No switches linked with key ID2

        MEM SW1: M1 switch linked with key ID2

        MEM SW2: M2 switch linked with key ID2

        MEM SW3: M3 switch linked with key ID2

        		 -
        Mem SW No. w/KeyID3 Memory switch linked with key ID3 NONE, MEM SW1, MEM SW2 or MEM SW3

        NONE: No switches linked with key ID3

        MEM SW1: M1 switch linked with key ID3

        MEM SW2: M2 switch linked with key ID3

        MEM SW3: M3 switch linked with key ID3

        		 -
        Mem SW No. w/KeyID4 Memory switch linked with key ID4 NONE, MEM SW1, MEM SW2 or MEM SW3

        NONE: No switches linked with key ID4

        MEM SW1: M1 switch linked with key ID4

        MEM SW2: M2 switch linked with key ID4

        MEM SW3: M3 switch linked with key ID4

        		 -
        Mem SW No. w/KeyID5 Memory switch linked with key ID5 NONE, MEM SW1, MEM SW2 or MEM SW3

        NONE: No switches linked with key ID5

        MEM SW1: M1 switch linked with key ID5

        MEM SW2: M2 switch linked with key ID5

        MEM SW3: M3 switch linked with key ID5

        		 -
        Mem SW No. w/KeyID6 Memory switch linked with key ID6 NONE, MEM SW1, MEM SW2 or MEM SW3

        NONE: No switches linked with key ID6

        MEM SW1: M1 switch linked with key ID6

        MEM SW2: M2 switch linked with key ID6

        MEM SW3: M3 switch linked with key ID6

        		 -
        Mem SW No. w/KeyID7 Memory switch linked with key ID7 NONE, MEM SW1, MEM SW2 or MEM SW3

        NONE: No switches linked with key ID7

        MEM SW1: M1 switch linked with key ID7

        MEM SW2: M2 switch linked with key ID7

        MEM SW3: M3 switch linked with key ID7

        		 -









      1. Body Electrical > Main Body > Data List
        Tester Display
        Mem SW No. w/KeyID1
        Mem SW No. w/KeyID2
        Mem SW No. w/KeyID3
        Mem SW No. w/KeyID4
        Mem SW No. w/KeyID5
        Mem SW No. w/KeyID6
        Mem SW No. w/KeyID7










      OK
      On the GTS display, it is confirmed that the memory call has been registered.
      Result
      Proceed to
      OK
      NG

  7. Click here

    CHECK MEMORY CALL FUNCTION (MEMORY REGISTRATION AND AUTOMATIC MEMORY CALL FUNCTION)


    1. Check the memory registration and automatic memory call function of the memory call function.

      Click here

      OK
      Memory registration and automatic memory call function operate normally.
      Result
      Proceed to
      OK
      NG

    • OK

      USE SIMULATION METHOD TO CHECKClick here

    • NG

      GO TO OTHER DIAGNOSIS PROCEDURE (Wireless-linked Return Function does not Operate)Click here

  8. Click here

    REPLACE MAIN BODY ECU (MULTIPLEX NETWORK BODY ECU)


    1. Temporarily replace the main body ECU (multiplex network body ECU) with a new or known good one.

      Click here

      Result
      Proceed to
      NEXT

  9. Click here

    CHECK MEMORY CALL FUNCTION (MEMORY REGISTRATION)


    1. Check the memory registration of the memory call function.

      Click here

      OK
      Memory registration operates normally.
      Result
      Proceed to
      OK
      NG

    • OK

      END (MAIN BODY ECU (MULTIPLEX NETWORK BODY ECU) WAS DEFECTIVE)

    • NGClick here
  10. Click here

    REPLACE FRONT POWER SEAT SWITCH (DRIVER SEAT)


    1. Temporarily replace the front power seat switch (driver seat) with a new or known good one.

      Click here

      Result
      Proceed to
      NEXT

  11. Click here

    CHECK MEMORY CALL FUNCTION (MEMORY REGISTRATION)


    1. Check the memory registration of the memory call function.

      Click here

      OK
      Memory registration operates normally.
      Result
      Proceed to
      OK
      NG

    • OK

      END (FRONT POWER SEAT SWITCH (DRIVER SEAT) WAS DEFECTIVE)

    • NG

      REPLACE CERTIFICATION ECU (SMART KEY ECU ASSEMBLY)