FRONT SEAT ASSEMBLY(for Manual Seat) COMPONENTS
ILLUSTRATION
| *1 | BATTERY SERVICE HOLE COVER LH | - | - |
ILLUSTRATION
| *1 | FRONT INNER SEAT TRACK BRACKET COVER | *2 | FRONT OUTER SEAT TRACK BRACKET COVER |
| *3 | FRONT SEAT ASSEMBLY | *4 | FRONT SEAT HEADREST ASSEMBLY |
| *5 | FRONT SEAT OUTER BELT ASSEMBLY | *6 | INNER SEAT TRACK BRACKET COVER |
| *7 | REAR OUTER FRONT SEAT TRACK COVER | *8 | SEAT BELT ANCHOR COVER CAP |
 |
N*m (kgf*cm, ft.*lbf): Specified torque | - | - |
ILLUSTRATION
| *A | for Driver Side | - | - |
| *1 | NO. 1 SEAT SLIDE POSITION SENSOR PROTECTOR | *2 | SEAT POSITION AIRBAG SENSOR |
| *3 | SEAT SLIDE POSITION SENSOR PROTECTOR | - | - |
| |
N*m (kgf*cm, ft.*lbf): Specified torque | - | - |
ILLUSTRATION
| *A | w/ Seat Heater System | - | - |
| *1 | SEAT HEATER CONTROL SUB-ASSEMBLY | - | - |
ILLUSTRATION
| *1 | FRONT SEAT INNER BELT ASSEMBLY | - | - |
| |
N*m (kgf*cm, ft.*lbf): Specified torque | - | - |
ILLUSTRATION
| *1 | FRONT SEAT CUSHION SHIELD | *2 | FRONT SEAT INNER CUSHION SHIELD |
| *3 | RECLINING ADJUSTER RELEASE HANDLE | *4 | SEAT ADJUSTER COVER |
| *5 | SEAT ADJUSTER COVER CAP | *6 | SEPARATE TYPE FRONT SEAT CUSHION COVER WITH PAD |
| *7 | VERTICAL ADJUSTER COVER | *8 | VERTICAL ADJUSTING HANDLE |
| *9 | VERTICAL SEAT RELEASE ARM | - | - |
ILLUSTRATION
| *1 | SEPARATE TYPE FRONT SEAT CUSHION COVER | *2 | SEPARATE TYPE FRONT SEAT CUSHION PAD |
| *3 | HOG RING | - | - |
| ● | Non-reusable part | - | - |
ILLUSTRATION
| *1 | FRONT SEAT AIRBAG ASSEMBLY | *2 | FRONT SEAT HEADREST SUPPORT |
| *3 | SEPARATE TYPE FRONT SEATBACK COVER WITH PAD | *4 | HOG RING |
| |
N*m (kgf*cm, ft.*lbf): Specified torque | ● | Non-reusable part |
ILLUSTRATION
| *1 | SEPARATE TYPE FRONT SEATBACK COVER | *2 | SEPARATE TYPE FRONT SEATBACK PAD |
| *3 | HOG RING | - | - |
| ● | Non-reusable part | - | - |
ILLUSTRATION
| *1 | FRONT SEAT CUSHION EDGE PROTECTOR LH | *2 | FRONT SEAT CUSHION EDGE PROTECTOR RH |
| *3 | FRONT SEAT LOWER CUSHION SHIELD LH | *4 | FRONT SEAT LOWER CUSHION SHIELD RH |
| *5 | RECLINING ADJUSTER INSIDE COVER LH | *6 | RECLINING ADJUSTER INSIDE COVER RH |
ILLUSTRATION
| *A | w/ Seat Heater System | - | - |
| *1 | FRONT SEAT WIRE | *2 | SEPARATE TYPE FRONT SEATBACK SPRING ASSEMBLY |
| *3 | SEPARATE TYPE FRONT SEAT CUSHION SPRING ASSEMBLY | - | - |
| |
N*m (kgf*cm, ft.*lbf): Specified torque | - | - |
ILLUSTRATION
| *1 | FRONT SEATBACK EDGE PROTECTOR | *2 | FRONT SEATBACK HOOK |
| *3 | FRONT SEATBACK SPRING SUB-ASSEMBLY | *4 | FRONT SEATBACK FRAME SUB-ASSEMBLY |
ILLUSTRATION
| *1 | FRONT SEAT CUSHION SPRING | *2 | SEAT BELT HOLE COVER |
| *3 | SEAT TRACK ADJUSTING HANDLE | *4 | FRONT SEAT ADJUSTER ASSEMBLY |