PRE-COLLISION SYSTEM CUSTOMIZE PARAMETERS


  1. Note


    • When the customer requests a change in a function, first make sure that the function can be customized.

    • Make a note of the current settings before customizing.

    Tech Tips

    The following PCS functions and the pre-collision system sensitivity setting can be changed from their default setting.

    CUSTOMIZE PRE-COLLISION SYSTEM


    1. Customizing with the GTS


      1. Turn the power switch off.

      2. Connect the GTS to the DLC3.

      3. Turn the power switch on (IG).

      4. Turn the GTS on.

      5. Enter the following menus: Customize Setting / Others.

      6. Select the setting by referring to the table below.


        Others
        Tester Display Description Default Setting ECU
        PCS Operation State Retention Setting Refer to the table below OFF 0:OFF,1:ON Driving support ECU assembly
        PCS Alarm Activation Distance Retention Setting 1 Refer to the table below OFF 0:OFF,1:ON Driving support ECU assembly
        PCS Alarm Activation Distance Retention Setting 2 Refer to the table below ON 0:OFF,1:ON Driving support ECU assembly
        PCS Alarm Activation Distance Retention Setting 3 Refer to the table below OFF 0:OFF,1:ON Driving support ECU assembly
        Customize Setting Description Setting
        PCS Operation State Retention Setting Function to maintain the pre-collision system on/off setting when the power switch is turned off and then on (IG).

        OFF: Not maintained (Pre-collision system always turns on)

        ON: Maintained
        PCS Alarm Activation Distance Retention Setting 1 Function to maintain the sensitivity setting of the pre-collision system when the pre-collision system is turned off and then on.

        OFF: Not maintained (Setting changes to "Mid")

        ON: Maintained
        PCS Alarm Activation Distance Retention Setting 2 Function to maintain the sensitivity setting of the pre-collision system when the power switch is turned off while the pre-collision system is on.

        OFF: Not maintained (Setting changes to "Mid")

        ON: Maintained
        PCS Alarm Activation Distance Retention Setting 3 Function to maintain the sensitivity setting of the pre-collision system when the power switch is turned off while the pre-collision system is off.

        OFF: Not maintained (Setting changes to "Mid")

        ON: Maintained