AIRBAG CUT-OFF SWITCH INSPECTION

PROCEDURE


  1. INSPECT AIRBAG CUT OFF SWITCH CYLINDER SUB-ASSEMBLY


    1. A0022Z6C03
      *a

      Component without harness connected

      (Airbag Cut Off Switch Cylinder Sub-assembly)

      Measure the resistance according to the value(s) in the table below.

      Standard Resistance
      Tester Connection Condition Specified Condition
      2 (PMC+) - 1 (PMC-) Cut off switch in ON position 360 to 440 Ω
      2 (PMC+) - 1 (PMC-) Cut off switch in OFF position 90 to 110 Ω

      If the result is not as specified, replace the airbag cut off switch cylinder sub-assembly.