FRONT SEAT SIDE AIRBAG ASSEMBLY(for Power Seat) INSTALLATION

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for the RH side and LH side.

  • The procedure listed below is for the LH side.

PROCEDURE


  1. INSTALL FRONT SEAT AIRBAG ASSEMBLY

    CAUTION:


    • The nuts must not be reused.

    • Make sure that the separate type front seatback spring assembly is not deformed. If it is, replace it with a new one.


    1. Install the front seat airbag assembly with 2 new nuts.

      Torque:
      5.5 N*m  { 56 kgf*cm, 49 in.*lbf }

    2. Engage the 2 clamps.

    3. A00228IC01
      B003Y0W Fastener

      Engage the fastener to secure the front seat airbag assembly wire harness.

    4. Engage the claw and 3 clamps.

      Tech Tips

      Engage the claw first.

  2. INSTALL SEPARATE TYPE FRONT SEATBACK COVER WITH PAD (for Standard Seat Type)

    Click here

  3. INSTALL FRONT SEATBACK PAD WITH COVER (for Sports Seat Type)

    Click here

  4. INSTALL FRONT SEAT HEADREST SUPPORT

    Click here

  5. INSTALL FRONT SEAT INNER CUSHION SHIELD

    Click here

  6. INSTALL FRONT SEAT CUSHION SHIELD

    Click here

  7. INSTALL FRONT SEAT INNER NO. 1 CUSHION SHIELD

    Click here

  8. CONNECT SEPARATE TYPE FRONT SEATBACK COVER (for Standard Seat Type)

    Click here

  9. CONNECT FRONT SEATBACK PAD WITH COVER (for Sports Seat Type)

    Click here

  10. INSTALL FRONT SEAT ASSEMBLY

    Click here

  11. PERFORM DIAGNOSTIC SYSTEM CHECK

    Click here