FRONT SEAT SIDE AIRBAG ASSEMBLY(for Manual Seat) INSTALLATION

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for the RH side and LH side.

  • The procedure listed below is for the LH side.

PROCEDURE


  1. INSTALL FRONT SEAT AIRBAG ASSEMBLY

    CAUTION:


    • The nuts must not be reused.

    • Make sure that the separate type front seatback spring assembly is not deformed. If it is, replace it with a new one.


    1. Install the front seat airbag assembly with 2 new nuts.

      Torque:
      5.5 N*m  { 56 kgf*cm, 49 in.*lbf }

    2. Engage the 2 clamps.

    3. A002218C02
      B003Y0W Fastener

      Engage the fastener to secure the front seat airbag assembly wire harness.

    4. Engage the claw and 3 clamps.

      Tech Tips

      Engage the claw first.

    5. Secure the front seat airbag assembly wire harness to the seat clamp.

  2. INSTALL SEPARATE TYPE FRONT SEATBACK COVER WITH PAD

    Click here

  3. INSTALL FRONT SEAT HEADREST SUPPORT

    Click here

  4. INSTALL FRONT SEAT INNER CUSHION SHIELD

    Click here

  5. INSTALL FRONT SEAT CUSHION SHIELD

    Click here

  6. INSTALL VERTICAL SEAT RELEASE ARM

    Click here

  7. INSTALL SEAT ADJUSTER COVER

    Click here

  8. INSTALL VERTICAL ADJUSTING HANDLE

    Click here

  9. INSTALL RECLINING ADJUSTER RELEASE HANDLE

    Click here

  10. CONNECT SEPARATE TYPE FRONT SEATBACK COVER

    Click here

  11. INSTALL FRONT SEAT ASSEMBLY

    Click here

  12. PERFORM DIAGNOSTIC SYSTEM CHECK

    Click here